Forum Replies Created

Viewing 23 reply threads
1 2 3
  • Author
    Posts
    • June 8, 2018 at 5:58 am #95443
      Juan David Gomez
      Participant

      Brian, Just emailed you. please give me a call. I would like to see what you have. Thanks

    • January 29, 2018 at 11:15 am #90675
      Juan David Gomez
      Participant

      Bump

    • February 14, 2017 at 2:13 pm #78192
      Juan David Gomez
      Participant

      Bump. Updated parts list

    • January 31, 2017 at 2:15 pm #77529
      Juan David Gomez
      Participant

      Updated list and prices

    • January 26, 2017 at 3:57 pm #77270
      Juan David Gomez
      Participant

      Updated items and reduced price

    • July 31, 2015 at 10:35 am #52182
      Juan David Gomez
      Participant

      Sorry that have to miss it but got scheduled to travel for work. Also missed the announcement that they are stock Honda was on the schedule. :(

    • May 19, 2015 at 1:42 pm #48497
      Juan David Gomez
      Participant

      I’ll be there, look out! ;)

    • May 15, 2015 at 6:48 am #48272
      Juan David Gomez
      Participant

      May be a DD2

    • May 6, 2015 at 5:43 am #47635
      Juan David Gomez
      Participant

      Tim, mine has the Badland winch so I guess there is no need for the catch. My bumper has the slots but it is still not quite level. I’ll shot you an email with a picture and will measure to see what length cables I need.

      Thank you

    • May 4, 2015 at 11:11 am #47555
      Juan David Gomez
      Participant

      Tim,

      Just recently got a Winchlift and I’m wondering where will the update will be available to the public. Also, where do you get the frame support kit? haven’t seen anyone selling them.

      I’ve also had to raise the hooks in order for them to grab the bumper without the bar bumping before they are all the way in. this is fine but know the kart is not flat when fully raised. is there a way to adjust for this? I was thinking shorter wires.

      Juan

    • March 17, 2015 at 6:43 am #44245
      Juan David Gomez
      Participant

      I’m new to shifters too and still sore from my first outing. :P
      The power and acceleration compered to anything else is brutal but jerking is never a good thing and it’s not normal.
      I would say to check your pilot and needle as they control the low to mid range.  good luck

    • February 16, 2015 at 11:29 am #42417
      Juan David Gomez
      Participant

      MARRS is a Road racing series that race in NE, KS and OK. check out the schedule at http://www.kart.org in Nebraska they race in Hastings. Topeka and Garnett are not too far out.

      http://www.racingwhere.com is a good source of info for track, series and schedules.

    • February 14, 2015 at 9:22 am #42261
      Juan David Gomez
      Participant

      hahaha, while I’ve been out getting a 99. doh!

    • February 12, 2015 at 1:43 pm #42165
      Juan David Gomez
      Participant

      Seems prayers have been answered. I’m surprised no one has said anything here.

    • January 3, 2015 at 5:23 pm #39840
      Juan David Gomez
      Participant

      $2800 for the roller

    • December 30, 2014 at 9:40 am #39640
      Juan David Gomez
      Participant

      Gale, Please check your email. sent you one back on the 24th

    • December 14, 2014 at 6:22 pm #38880
      Juan David Gomez
      Participant

      Delete

    • December 2, 2014 at 8:04 am #38143
      Juan David Gomez
      Participant

      Bump

    • November 1, 2014 at 10:01 am #36335
      Juan David Gomez
      Participant

      Price drop to $3500 Firm. Moving to Shifters.

    • October 25, 2014 at 9:05 am #35937
      Juan David Gomez
      Participant

      Price drop to $3800-Moving to Shifters. or make serious offer.

    • October 20, 2014 at 8:15 am #35607
      Juan David Gomez
      Participant

      It has been a while so I don’t even remember what my previous pick were:

      Q:HAM-ROS-VOT

      R:HAM-ROS-RIC

    • October 16, 2014 at 12:25 pm #35371
      Juan David Gomez
      Participant

      In general, the basic set ups and changes you preform will have similar handling effects regardless of the brand, year, model, wear.

      A good old used chassis can still be competitive in the right hands. there is some consensus that different geometries and tube diameters are suited better for some classes than others. and/or different tires. but this varies wildly.

      As a general rule the heavier the class the larger the tube diameter used. This is also true for the more horse power so for the Junior classes you see 28mm while the masters and shifters trend to use  mostly 32mm but this is not always the case as some will use a contamination of 32/30mm and it changes from model to model year to year.

      Don’t get tangled on this yet. Just go get something cheap where you can learn the basics and once you know what you might need you may want to worry about tube diameter, geometry and wear. there are all sorts of discussions about the subject here so if you are bored one day go ahead and get some reading.

    • August 22, 2014 at 5:51 am #32420
      Juan David Gomez
      Participant

      Q: ROS-HAM-BOT

      R:HAM-BOT-ROS

    • August 21, 2014 at 10:27 am #32364
      Juan David Gomez
      Participant

      Just send you an email

    • June 8, 2018 at 5:45 am #95439
      Juan David Gomez
      Participant

      Sorry people I didn’t check before and put the wrong number it was 304 instead of 305. someone already contacted me on facebook and bought the set.

  • Author
    Posts
Viewing 23 reply threads
1 2 3