Forum Replies Created

Viewing 13 reply threads
  • Author
    Posts
    • May 15, 2016 at 5:47 pm #65961
      Thomas Salandra
      Participant

      It is the hanger itself. It is cracked on the connection to the frame and needs to be straightened.

    • July 30, 2014 at 8:33 am #31169
      Thomas Salandra
      Participant

      You might even have a cracked fly-wheel. The same thing happened to me and that was the issue.

    • July 30, 2014 at 8:31 am #31168
      Thomas Salandra
      Participant

      I am running the same class and I use a Horstman dry clutch. I use the  three -disk and it is not worth the money. A two disk dry clutch is the way to go. I would say to use either a Patriot clutch that is made by Comet Kart Sales or a Tomar clutch. The TD-23 (Tomar) is what most people in Yamaha run. We had a racer this weekend do the same thing that you did with the same clutch.

    • July 28, 2014 at 5:40 pm #31073
      Thomas Salandra
      Participant

      What year is it and do you have any pictures?

       

    • July 15, 2014 at 8:21 am #30312
      Thomas Salandra
      Participant

      Is this a cadet chassis?

    • July 15, 2014 at 8:16 am #30311
      Thomas Salandra
      Participant

      What about the K1?

    • July 15, 2014 at 8:13 am #30310
      Thomas Salandra
      Participant

      Do you still have the  Road rebel?

    • May 23, 2014 at 12:20 pm #27902
      Thomas Salandra
      Participant

      I have been racing for two years now, I know about the motor quite well. The guy that ones it never raced it and bought it from a guy that raced it a hand full of times. What should the number says to tell what year it is?

    • May 22, 2014 at 12:15 pm #27841
      Thomas Salandra
      Participant

      The kart is between 5-6 years old. It has a KT100 on it. Do you know how to tell the model year on the kart. Also what should I pay for it. The seller wants to know what he should sell it for.

    • May 8, 2014 at 4:06 am #27084
      Thomas Salandra
      Participant

      Here is a link to the Craigslist post I have on it.

      http://newjersey.craigslist.org/sno/4399896232.html

    • May 8, 2014 at 4:01 am #27083
      Thomas Salandra
      Participant

      I am located out in New Jersey.

    • May 7, 2014 at 4:02 am #26992
      Thomas Salandra
      Participant

      The flywheel is out 180 degrees?

    • May 6, 2014 at 5:47 pm #26981
      Thomas Salandra
      Participant

      How do I advance and retard the timing if it is set by the position of the coil and flywheel?

    • May 5, 2014 at 5:41 pm #26910
      Thomas Salandra
      Participant

      I have the same and set it slip 8500 rpms. It runs better than it ever has when I did this.

  • Author
    Posts
Viewing 13 reply threads