Forum Replies Created

Viewing 23 reply threads
  • Author
    Posts
    • #59772
      Mark Erpelding
      Participant

      The cover is dark grey.  I still have it.

    • #59771
      Mark Erpelding
      Participant

      The cover is grey.  I still have it.

    • #53793
      Mark Erpelding
      Participant

      How many racers would like to see Rock Island have a spec tire for your class?   Would more racers attend if they had a spec tire?  Do you like the open tire rule?

    • #50612
      Mark Erpelding
      Participant

      I have a what I believe is around a 1995 Esprit Step III.  Complete with front breaks I have owned it since it was one race old..  Original everything…

    • #43438
      Mark Erpelding
      Participant

      Go buy some 5/16 x3 “elevator bolts at Fastenall..   drill 2 holes in the heads approx. 3/16 “and use a inexpensive adjustable spanner wrench to hold them from spinning…

    • #41766
      Mark Erpelding
      Participant

      What they haven’t shown is how Camden Speth and Joey Eppink ran up front the whole Robo Pong race. Joey is listed the #2 100 cc. driver in the country by Kart rank.  And beat the #1 rated driver by over 10 seconds in the Robo Pong Race …With a very limited budget..  Karting does not have to be as expensive as they portray it.   And all of the top kids aren’t spoiled brats…   They didn’t expose the true Karter!

    • #39553
      Mark Erpelding
      Participant

      Wow…  8 karts in Yamaha Senior….  When we raced it there were 28..   WKA-  Where’s Karts At….

    • #37103
      Mark Erpelding
      Participant

      Call me 260-410-1053

       

    • #36706
      Mark Erpelding
      Participant

      The cost of racing a go kart is getting plain STUPID at a National Level…  A friend of mine laughs at me when I tell him how much it cost me to race!   He has a modified and is paid Tow money just to show up!   They are going to hurt the attendance by out pricing themselves.   REMEMBER THIS IS ONLY GO KART RACING!

    • #36705
      Mark Erpelding
      Participant

      I sell cleaning chemicals…  Each year at our banquet I give away a gallon of Wayne Chemical Industrial Green.   It is Simple Green on Steroids.    Here is the best way to do it.   Put suit in 5 gallon bucket add 24-32  Wayne Industrial Green agitate in Luke warm water.   Agitate.   Put something on top of suit to keep it from floating.  Let set overnight.   WASH IN FRONT LOADER WASHER ONLY!   A TOP LOADER WILL SHREAD THE SUIT!   TRUST ME!   After washed Re- wash this time with no cleaning chemical.   I have shared this method with many from New Castle Racers and they are amazed how clean they come.   The Wayne Industrial Green is only about $ 13.00 a gallon and Blows away all of those High dollar cleaners.   I have never had anyone tell me that the Wayne Industrial Green pulled any color from their suits…

       

    • #36703
      Mark Erpelding
      Participant

      I was afraid of the 850 degree heat also..  Go to a real autobody paint store and buy some Aircraft stripper.   Brush it on the frame let set (not in the sun) keep moving stripper around with brush.   If you use a wire brush it will remove powder coat to bare steel and re- apply stripper and it will work from edges where wire brush went to bare metal and pop powder coat off easier.   After you have it stripped the only hard part to get removed will be around the welds.   Take it to car wash apply more stripper around welds let set  for about 15-20 min and it will spray off completely.   If you know of a slow car wash you could do it all there .   The wire brush really helps.  It will not rust.  The powder coater will lightly blast it..   Make sure u tell them not to put in stripping oven!  I did this to our frame.   Striped it on Wednesday , dropped it off at powder coater on Thursday, picked picked it up on Friday, assembled it Friday night.   Went racing with it Saturday and
      Won first race with new paint and plastic..   Kart looked like New.   I used a Dremel tool with a sanding drum to remove powder coat in the spindles so the adjusters would turn freely.

    • #36394
      Mark Erpelding
      Participant

      WKA – Where’s Karts At…..

    • #36393
      Mark Erpelding
      Participant

      Nothing beats Boss CPS by Wayne Products Ft Wayne Indiana…   Safe on paint , plastic, decals….

      The Best by far….  Can be bought from Comet…

    • #33199
      Mark Erpelding
      Participant

      We have missed it 2 years due to it conflicting with college move in.   I only was able to make it with another driver in the seat.  I am sure others are in the same position.   It is nice to have a day to recover from traveling though.  I arrived home at 4:09 am Monday slept all day!  How about a jr.  Yamaha class?  maybe even jr. sportsman?

    • #33031
      Mark Erpelding
      Participant

      The Rock is my favorite race of the year!   It is late in the year when race budgets are diminished.   I am sure that is why some ppl. don’t come.   However they are missing the Best race of the year.    They need to save their budgets to be able to come to it.   They are missing the Indy 500 of karting…  Roger and his dedicated staff do an outstanding job!  The race is run with precision…   The whole town is behind it and make you feel welcome!   Thank you to the staff of The Rock Island Grand Prix for all of your hard work and efforts…  I realize how much it takes to put this on for “us”     Everything has a on and off year…  I think from talking to some other ppl. they were just not able to come this year due to lack of funds…  If you look at the core of karting ” KT 100 and L206 the numbers were there…   It was the expensive classes to run that were down in numbers.   A Big Thank You again to Roger and the entire staff who makes the “Rock” possible…   If some of the ppl that have never experienced it would come they would understand why it is on my all time favorite list!   Very tough competition!   Bring your “A” game or stay home!

    • #19729
      Mark Erpelding
      Participant

      How about a list of classes and weights?

    • #18857
      Mark Erpelding
      Participant

      To end up with a small fortune from racing you first have to start with a large one!

    • #18490
      Mark Erpelding
      Participant

      This is what I have decided to do to help promote karting…

      1…  Buy a Strip Mall

      2…  Tear it down

      3…  Build a Race Track!

    • #16713
      Mark Erpelding
      Participant

      That the races are not allowed to turn into a demolision derby like the National races are…  If I was running a series if I saw some deliberate ruff driving they would go home with last place points..  If they say it was unintended I bet they get a lot cleaner after they go home with last place points…

    • #16230
      Mark Erpelding
      Participant

      I have a Honda 2000 is (inverted)  it runs whole trailer 6-15″ double bulb florscent.  Stereo with amp, 12 v tv. 12 v.pump on sink.  If I needed I would buy another 2000is companion then parallel them if I had air conditioning or a large draw compressor…   If I had room I would have bought a 3000 I    I have nitrogen so I don’t use a compressor..   Go to generator websites they will tell you how to do the math and see how much wattage you will need..  Do a search on Daylister it finds objects on craigs list all over the country..  I paid $650.00 for my 2000 with 3 hours on it.

    • #15795
      Mark Erpelding
      Participant

      This is a very cool track….  I am glad to hera it is re-opening…  I races there around 1991 or so…

    • #15435
      Mark Erpelding
      Participant

      I would check and see if PCR parts would fit it..  The manfg.  of GP and PCR are brothers..

    • #15120
      Mark Erpelding
      Participant

      A Yamaha will not compete evenly against a KPV…  I raced against them years ago when they called them HPV…  The HPV has a lot more off the corner…This is just a band aid to try and fix the lack of participation in the now Yamaha pipe class…   Great Idea!!  Take two classes combine them and still not have as many entries as they had in Yamaha Senior can…  Wake up and smell the 2 cycle!!!!  GO back to the can!!!!    Coke a Cola messed with their proven winning formula and it didn’t take long to go back…  Admit your mistake WKA and go back and we will return!!!

    • #14291
      Mark Erpelding
      Participant

      I am looking for a set of the origional gold rims for a Tony Kart.  I need them to fit 6″ tires like Junior yamaha or rain tires.  260-410-1053 please txt

    • #22108
      Mark Erpelding
      Participant

      Mac 8, Mac 9, Mac 91, Mac 91A, 101 Mac, Yamaha KT100, Leopard.

      Nothing like the smell of castor in the morning.  At the end of the race season I bring home my left over race gas and put it in my snow blower to get me through the winter!

Viewing 23 reply threads