Forum Replies Created
-
AuthorPosts
-
-
June 9, 2015 at 9:07 am #49601Michael MonaghanParticipant
Where are you located and how much are you asking for the 3?
-
June 8, 2015 at 3:44 pm #49561Michael MonaghanParticipant
Do you still have any of the Mychrons still? If so, give me a call or text 714-767-6278 thank.
-
April 4, 2015 at 10:57 am #45430Michael MonaghanParticipant
I did find an air leak at the cylinder, so I threw some new gaskets on and rebuilt the carb while it was off. I won’t get a chance to run it till the next race though. From what I could find online though, a non-blueprinted carb runs at 1 1/2 low and 3/4 to 1/2 on the high. Seem to be a little different from all the blueprinted one, but then again, this is just going off of shop manuals.
-
March 22, 2015 at 10:11 pm #44596Michael MonaghanParticipant
Let me know when you get the pics.
-
March 17, 2015 at 1:36 pm #44288Michael MonaghanParticipant
Mine a little over 8.5″, but you may also need to move it further forward if you are adding any weight to the back of the seat. If it has a flat spot on the bottom of the seat, make it parallel with the frame rails. This should give you a good angle to start with. What model and year may also have an effect on where the seat is placed. Mine is a 2008 CRG KT11
-
March 16, 2015 at 4:45 pm #44212Michael MonaghanParticipant
-
February 28, 2015 at 11:18 am #43204Michael MonaghanParticipant
https://new.ekartingnews.com/forums/topic/honda-cr85-complete-package-1200/
I have a CR85 complete motor package with everything ready to go if you are interested.
$1100
-
February 28, 2015 at 10:20 am #43201Michael MonaghanParticipant
Price reduced to $1100
-
February 26, 2015 at 11:35 am #43081Michael MonaghanParticipant
Where are you located?
-
February 26, 2015 at 10:05 am #43070Michael MonaghanParticipant
Price dropped $1700
-
February 24, 2015 at 3:29 pm #42973Michael MonaghanParticipant
I have a CR85 complete package for sale. Someone should be buying it in 2 weeks for $1000, but you never know. You can text me if you have any questions 714-767-6278. I’m located in Huntington beach CA
-
February 18, 2015 at 10:28 am #42541Michael MonaghanParticipant
I also have an xl tillett quarter padded seat if the ml does not fit.
-
February 10, 2015 at 10:53 am #42026Michael MonaghanParticipant
The chassis number is 148CH08 and the model is R32. I’ve only done the top end myself, so honestly I’m just going off of what the previous owner had told me about the third gear.
-
-
AuthorPosts






