I did find an air leak at the cylinder, so I threw some new gaskets on and rebuilt the carb while it was off. I won’t get a chance to run it till the next race though. From what I could find online though, a non-blueprinted carb runs at 1 1/2 low and 3/4 to 1/2 on the high. Seem to be a little different from all the blueprinted one, but then again, this is just going off of shop manuals.
March 22, 2015 at 10:11 pm
in reply to: Sold#44596
Mine a little over 8.5″, but you may also need to move it further forward if you are adding any weight to the back of the seat. If it has a flat spot on the bottom of the seat, make it parallel with the frame rails. This should give you a good angle to start with. What model and year may also have an effect on where the seat is placed. Mine is a 2008 CRG KT11
March 16, 2015 at 4:45 pm
in reply to: SOLD!#44212
I have a CR85 complete package for sale. Someone should be buying it in 2 weeks for $1000, but you never know. You can text me if you have any questions 714-767-6278. I’m located in Huntington beach CA
The chassis number is 148CH08 and the model is R32. I’ve only done the top end myself, so honestly I’m just going off of what the previous owner had told me about the third gear.
