[Jeff Grivers]

bump.

[Jeff Grivers]

Hi Brock,  I just sent you a PM.

[Jeff Grivers]

Here is a complete parts list.  All the parts i have to sell are in good working condition and are not broken.  I usually base my prices at 50% less than the cost of new unless the part is not in good condition of course.  New prices are taken from fastech-racing.com which is a reasonably priced site.

-OTK Steering Wheel -$75

-OTK Steel Brake and Accelerator Pedals -$75 for both or $40 each

-OTK Clutch Lever – $20

-OTK Gear Shift Lever with Linkage and Heim joints -$100

-OTK Steering Wheel Hub – $40

-OTK Torsion Bars W/ Clamps – i have the rear bar, the front flat bar, and the front gold 2mm tubular bar(stiffer) – $50 each

-OTK Foot Support Complete Kit – $75

-OTK Left Spindle W/castor/camber pills and 10mm kingpin – $100

-OTK Wheels 2 front 2 rear i believe they are MAG wheels – $200

-Steering Shaft (brand new) – $80

-OTK Forged Aluminum Axel Cassettes 40/50mm 3 position i have 3 of these – $75 each

-OTK Front Wheel Hubs for BS5-7 brake system, i have 2 – $125 each

-OTK Rear Wheel Hubs i think there 50/92mm, i have 2 – $60 each

-OTK Right & Left Side Bumpers M4 – $50

-OTK BS5 Complete Brake System – includes front calipers,rotors,master cylinder,lines, and rear rotor,caliper, and master cylinder, line.  – asking $800 for the full brake setup but make me an offer.

 

[Jeff Grivers]

Forgot to mention i also have the following:

-OTK Brake pedal

-OTK Accelerator Pedal

-OTK Complete Foot Support

-Clutch Lever

-Steering Wheel Hub

 

[Jeff Grivers]

i Have a fuel tank out of my 09 Racer EVR.  Its not the prettiest thing but it works.  Let me know.

[Jeff Grivers]

I sent you a PM.

[Jeff Grivers]

Hi Mark,

 

I have 1 25mm OTK spindle and a 10mm kingpin as well as OTK Hubs if your interested.

[Jeff Grivers]

do you still have this Kart?

 

[Jeff Grivers]

is this a shifter chassis?

 

[Jeff Grivers]

is this a shifter chassis?

[Jeff Grivers]

is this a shifter chassis?

[Jeff Grivers]

Thanks for the heads up Fred.  Much Appreciated.

[Jeff Grivers]

Hey man did you ever sell this motor?  If not im interested.

[Jeff Grivers]

Do you still have this engine?  I am interested.

[Jeff Grivers]

Awesome.  I heard the R4 has a punchier top end.  Ijust purchased the kart and it came with the R2so I will give that a try for now.  Does the R2 make less power in general or just make the power in a different RPM range like the midrange?  Thanks for the info with the sound.  I have a 12″ RLV on there now so I prob will have to pick up a 14 to run at F1.

[Jeff Grivers]

do you still have the motor?

[Jeff Grivers]

could you send me pics of the kart lift pro stand and the turbo tire removal tool?  Contact info below.  thanks

401-339-2895

greff9@gmail.com

[Jeff Grivers]

I am also getting into shifters and I plan on running the NESKS and would love to hear more on what is legal and what is not.  It is my understanding that NESKS has the stock Honda (which the ignition/electronics, porting, carburetor, combustion chamber all have to be stock and use a 99 or 01 cylinder).  I don’t think they run a modified Honda class.  They run the ICC and moto engine shifter karts at the same time but score them separately.  I am not 100% on all this and would love to hear more on the topic.

[Jeff Grivers]

Is this a shifter chassis?

[Jeff Grivers]

Any details?  What are you asking for it?

[Jeff Grivers]

This is a nice kart.  looks to be in good shape.  I have never heard of BRM.  Is it difficult to find parts for these?  Where do you usually buy parts for it?

[Jeff Grivers]

do you still have the kart?

[Jeff Grivers]

Hi. Is this kart still available?  I have some questions.

[Jeff Grivers]

Do you still have the kart?  Any pics?

[Jeff Grivers]

Do you still have this kart for sale?

[Author]

Posts