Viewing 3 reply threads
  • Author
    Posts
    • #48198
      Jeff Grivers
      Participant

      Forgot to mention i also have the following:

      -OTK Brake pedal

      -OTK Accelerator Pedal

      -OTK Complete Foot Support

      -Clutch Lever

      -Steering Wheel Hub

       

    • #48220
      Jeff Grivers
      Participant

      Here is a complete parts list.  All the parts i have to sell are in good working condition and are not broken.  I usually base my prices at 50% less than the cost of new unless the part is not in good condition of course.  New prices are taken from fastech-racing.com which is a reasonably priced site.

      -OTK Steering Wheel -$75

      -OTK Steel Brake and Accelerator Pedals -$75 for both or $40 each

      -OTK Clutch Lever – $20

      -OTK Gear Shift Lever with Linkage and Heim joints -$100

      -OTK Steering Wheel Hub – $40

      -OTK Torsion Bars W/ Clamps – i have the rear bar, the front flat bar, and the front gold 2mm tubular bar(stiffer) – $50 each

      -OTK Foot Support Complete Kit – $75

      -OTK Left Spindle W/castor/camber pills and 10mm kingpin – $100

      -OTK Wheels 2 front 2 rear i believe they are MAG wheels – $200

      -Steering Shaft (brand new) – $80

      -OTK Forged Aluminum Axel Cassettes 40/50mm 3 position i have 3 of these – $75 each

      -OTK Front Wheel Hubs for BS5-7 brake system, i have 2 – $125 each

      -OTK Rear Wheel Hubs i think there 50/92mm, i have 2 – $60 each

      -OTK Right & Left Side Bumpers M4 – $50

      -OTK BS5 Complete Brake System – includes front calipers,rotors,master cylinder,lines, and rear rotor,caliper, and master cylinder, line.  – asking $800 for the full brake setup but make me an offer.

       

    • #48809
      Ty mitchell
      Participant

      Do you have any long 85mm or 90mm hubs? If so can you send pictures to 936 828 zero95two

    • #49563
      George Young
      Participant

      Jeff, I PMed you. Want the foot support.

      Geofyoung3@gmail.com

Viewing 3 reply threads
  • You must be logged in to reply to this topic.