[Bryan Williams]

I see mcp has the euro style or their reg style for master cylinder and calipers. Think one has a benefit over the other?

[Bryan Williams]

http://m.summitracing.com/search/product-line/wilwood-billet-go-kart-calipers

 

[Bryan Williams]

Right now I am running a drilled and full float disk.  are these the correct ones?

<span style=”line-height: 1.5;”> </span>

<span style=”line-height: 1.5;”>So which one would you use. They all just seem to small. Am I not looking at the correct ones?</span>

[Bryan Williams]

What color is it? Black or gold

[Bryan Williams]

Text sent

[Bryan Williams]

I think I have what you need man. I’ll look when I get home this afternoon. Think I have a blue set and a yellow set.

[Bryan Williams]

Thanks for The reply, great info. I just finished my second full season and I think I did pretty good. Really haven’t done any chassis tuning and really want to start dialing in my chassis and try to make it corner more smoothly. I currently have a medium axle with medium length hubs. Not sure though on how I could tell if I’m getting proper inside rear tire lift besides setting up a camera at the turn. Also thought of just buying a soft axle and see how it rides to test.

[Bryan Williams]

Sorry forgot to mention we run a kt100 motor.

[Bryan Williams]

1. Email sent

[Bryan Williams]

What size rims are they? Front and back.

[Bryan Williams]

Pm sent in tires

[Bryan Williams]

This is a joke, right?

[Bryan Williams]

I wouldn’t describe them as older. They would be brand new, not really even brought up temp. Just scrubbed on the last practice session to remove the shine. I might do a test this sat. Just might cost me a set of tires to find out.

[Bryan Williams]

yeah it’s Bakersfield. Well take care of all your honey do’s and come out.

 

[Bryan Williams]

I’ll be running a kt100 with the rlv3 pipe and from what I’m told it’s a high grip track, I really don’t have any other track experience to compare it to.

[Bryan Williams]

[quote quote=53288]As long as there is fuel in the line it could go over the empire state building because the fuel on the down side will balance the fuel on the up side. Get a filter made for two stroke fuel. Walbro makes a nice one. Try to mount it vertical so it doesn’t trap a big bubble. Gif [/quote]

At my track I have always seen and myself included the filter horizontal about 6 inches out of the carb. Are you saying it might be better vertical, say alone side the fuel tank where the fuel line is routed?

[Bryan Williams]

Here is the 2nd heat.The main is a boring video. Since I’m in the front the whole time.

Bakersfield Kart Raceway 12SEP15 heat 2: https://youtu.be/LR5KjKCJ2xg

[Bryan Williams]

pm sent

 

[Bryan Williams]

I am sure it would last longer in a metal can with sealed top? Like the one you get when  you buy race gas in a store.

[Bryan Williams]

make me an offer. What are they worth to someone?

[Bryan Williams]

I race at Bakersfield Kart Raceway and that’s  negative on the hpv pipe. Going to need a RLV. also we will be doing more can races this year

[Bryan Williams]

Hey sorry Freddy. Just saw the responses. It was just a thought I had the other day. Thanks for all the comments from everyone. And I’ll try not to pass you Freddy, until the last turn.

 

[Bryan Williams]

Text sent

[Bryan Williams]

The simple green idea I read on another forum concerning full size race tires so I assumed that would translate to kart tires as well. I do deflate them and store in my garage.

[Bryan Williams]

Thanks Freddy, although I don’t think your going to let me get away with it so easy next race. Should be fun with a big field.

I checked for play and I have hardly any up and down movement. I might could find a tig welder in town that can tack that back on for me. I wanted to have Orville check my alignment and all that with a laser anyways this weekend.

Thanks

[Author]

Posts