[Andrew Kutscher]

Sourced what I needed, no longer looking.  Thanks to everyone for reaching out.

 

[Andrew Kutscher]

Not to beat this to death but I’m curious if there are updates as well.  Lots of great info I’m looking for in old threads that can’t be accessed currently.

error message:

<b style=”color: #000000; font-family: ‘Times New Roman’; font-size: medium;”>Critical Error</b><span style=”color: #000000; font-family: ‘Times New Roman’; font-size: medium;”> </span><br style=”color: #000000; font-family: ‘Times New Roman’; font-size: medium;” /><br style=”color: #000000; font-family: ‘Times New Roman’; font-size: medium;” /><span style=”color: #000000; font-family: ‘Times New Roman’; font-size: medium;”>Error creating new session</span>

[Andrew Kutscher]

Buy with confidence, great seller. Very happy with my recent purchase  from Tom, actually kicking myself for not picking up that pipe while I was at it.

-Andy

[Andrew Kutscher]

Engine blueprinted or just carb?

Piston size?

location?

contact info?

Thanks

[Andrew Kutscher]

Tony, as always I appreciate your input and help here.  As a follow up I took the SSX and YBX cans and blew them apart and put them on a bench to evaluate the differences.

To answer my own question the YBX will never flow as much as the SSX even if modified because the diameter of the header pipe coming off of the cylinder is smaller and a choking point that can’t be overcome on the YBX.

That said…I still drilled out the holes on the YBX in a similar pattern to the SSX on the inside, put a few more holes in the cap and put it all back together and it’s going to work just fine with the WB3A big carb I put on her motor to give her the power needed to keep up with me and have a little fun.

Had I not been bored with nothing better to do a $40 used SSX can would have still been the better option in my opinion but my fix will work out for her since it’s just for fun.

[Andrew Kutscher]

I’ve never seen the Alfano before but while it looks cheaper on the surface it doesn’t come with any leads.

By the time you do the Pro 3 plus GPS plus a single temp sensor it’s like $30 difference between that and the Mychron 5.

I do see how it can be more of a savings if you’re using 2 temp sensors as the expansion method on the Alfano is a $30 adapter vs. $100 for the 2T Mychron.

[Andrew Kutscher]

Tony,

Thanks for the tips I really appreciate them.  I’m working on the driver and setup issues trying to get comfortable in the kart as it’s a little bit of a transition from my GT3 but has been a fun challenge so far.

-Andy

[Author]

Posts