Forum Replies Created

Viewing 20 reply threads
  • Author
    Posts
    • #87617
      Wade Wishneski
      Participant

      Kart is tentatively sold, have deposit on kart.

    • #87570
      Wade Wishneski
      Participant

      I’m about to part this kart out, let me know what you may have interest in purchasing:
      2015 Compkart Covert 3.0 chassis – roller including Magnesium wheels $1300
      P1 X30 with 10 hours since full rebuild last Winter complete with accessories $1900
      Mychron 5 2T with leads – new in April 2017 $425
      Lithium battery – extremely light $50
      Magnesium Vib Plate – extremely light $25
      Prices do not include shipping.
      Contact Info:
      wade@spearcoyne.com
      215-459-5736

    • #87482
      Wade Wishneski
      Participant

      New price $1950 shipped.

    • #87410
      Wade Wishneski
      Participant

      Make me an offer I may just take it? I want this thing gone. All good components on this kart, no junk. Mychron 5 2T, engine hour meter, mag parts, lithium battery, needle bearing steering block, P1 X30 etc.

    • #87408
      Wade Wishneski
      Participant

      Want this thing gone, no longer racing so I do not need it. $2300. This motor just rebuilt by P1 with no laps since rebuild, a true fresh motor. All accessories come with it.

    • #87195
      Wade Wishneski
      Participant

      I do not need these any longer. They are original IAME front drivers not soft aftermarket drivers. Both for $65 shipped.

    • #86749
      Wade Wishneski
      Participant

      New Price $3700. want to move it. Mychron 5, Lithium Battery, Hour meter, P1 X30, you wont find these items on a kart priced this low!!

    • #86478
      Wade Wishneski
      Participant

      $2500 shipped!

    • #86375
      Wade Wishneski
      Participant

      One left, make me an offer, i may just take it?

    • #84283
      Wade Wishneski
      Participant

      Gene

      Yes try the Full Tilt rental first.  Yes they rent out TAGs, typically a Leopard motor.

      If your interested in getting involved, it should be a TAG kart, especially in the NJ, PA, NY, and New England states, region of the country.  LO206 is not catching on.

      As for pricing, do yourself a favor and buy a good used kart.  IMO, a Tony, Compkart or Birel are your best bets for support and tunability in this region of the country.  Yes there are other brands but these are by far the most popular TAG karts in the NJ region.  I’m not a salesman, this is just an objective observation.  Price $3000 – $3500 for a good used Tony kart  or Compkart.  As for motor, go with a IAME X30.  Again, by far the most popular in the NJ region.  It is also fairly easy to tune & maintain.  You can find good used X30’s for about $2200 – $2500.  As for finding good used equipment, talk with dealers in this region, i.e. Kaos Kart Shop, Full Tilt, J3 Competition.  As for an X30, this EKN site has been a good option.  I’ve personally bought 3 – X30’s from guys on this site and all have been a good experience!

    • #84271
      Wade Wishneski
      Participant

      To clarify, the F Series does promote a series of events called the State Championship Series which comprises 10 events split between New Jersey Motorsports Park (NJMP) & Englishtown.  This is a good club type series and runs separately from the The F Series Gear Up events which is comprised of 6 events.  If you’re in the NJ area, the F Series State Championship and Oakland Valley (OVRP) are both good options.  We run the full State Championship series and select F Series Gear Up events.  In this area though, LO206 has not really taken off as much as some have tried, so your viable option really is TAG.  Full Tilt Racing does offer rentals at the State Championship events if you’d really like to try it before diving into karting.  FYI: there is a State Championship event this weekend at Englishtown, NJ

      http://www.thestatechampionship.com/

    • #76115
      Wade Wishneski
      Participant

      New Price $85  I do not need this seat!!!   BRAND NEW, NEVER USED, NEVER DRILLED!!

    • #76113
      Wade Wishneski
      Participant

      New Price $22. shipped I do not need them.

    • #75581
      Wade Wishneski
      Participant

      SOLD

    • #75209
      Wade Wishneski
      Participant

      Pete

      If your still looking for a roller, I have a 2014 Swiss Hutless EVO chassis I want to move.  We are going in a different direction, hence the need to get rid of it. It was recently tabled and is fine.  Nothing is wrong with it, i just want it gone!  $500.  Located near Philadelphia.

      contact info:

      wade@spearcoyne.com

      215-459-5736

    • #75199
      Wade Wishneski
      Participant

      I have two full sets of these DWT LV Wheels.  I do not need them, make me an offer.

    • #75080
      Wade Wishneski
      Participant

      SOLD.  Thanks EKN!!

    • #75037
      Wade Wishneski
      Participant

      SOLD DELETE ME

       

    • #75034
      Wade Wishneski
      Participant

      New Price $2200.  This kart is clean!!

    • #74763
      Wade Wishneski
      Participant

      I made a correction to original posting, front wheels are 132mm x 5″.  My original post had 130mm x 5″.

    • #74678
      Wade Wishneski
      Participant

      Make me an offer, I may just let it go at your offered price??  Need the space, my loss could be your gain!!

       

    • #84669
      Wade Wishneski
      Participant

      Gene,

      If someone tried hard to get LO206 going it could work in the area, it has proven successful in other areas of the States.  Not everyone who has interest in this sport wants to go 65 mph or spend a fortune on tires and motor rebuilds of $1000 -$1200.  That is the upside to LO206, people want to race something affordable without spending thousands and thousands.  You can still race TAG on a budget, you just have to set that bar on what you want to spend.  For example, I made the decision this past weekend at Etown not to put on new tires for race day and save the $210, unfortunately the tires I used were considerably worn and my performance suffered, but I made that choice since there was so few participants in the Masters class last Sunday.  If there was more participants, I would have put new rubber on the kart, but I felt it wasn’t worth it that day.  My point is you just determine from the outset what you want out of kart racing.

    • #84668
      Wade Wishneski
      Participant

      Hey Mike,

      Yeah, haven’t seen you around for a while so i figured something was up.  Your Comp is a 2016?  Its just a black frame rather than a Flou yellow, correct?

      May be easier to sell without the motor?  Rotax is dead for sure!!  Any idea on what $$$ you may want for it?

    • #84359
      Wade Wishneski
      Participant

      [quote quote=84298]Gene, Am in same boat as you. The only thing I could find that seems to fit the bill is through full tilt karting at the englishtown raceway. I am headed there Saturday to speak to them and go round in circles on their tag kart. They seem to run more than just arrive and drive services. I will ask about racing leagues etc. for us older farts (I am 47) and will let you know what they have to say. [/quote]

      Dom

      Go there Saturday and rent a TAG kart from Full Tilt and run it to get an idea of karting.  Talk with Full Tilt, they are a Tony Kart dealer.  As for your age, I’m 52 and racing the F Series State Championship Series is perfect, 10 races and I’m fairly competitive in that series.  Other dealers will be there on Saturday as well, including Compkart dealers.

    • #84353
      Wade Wishneski
      Participant

      Gene

      A good used chassis = $3000 – $3500

      A decent used X30 = $2200 – $2500

      Mychron 5 new = $500

      Do yourself a favor and buy good used stuff & save yourself the agg of replacing that “decent used package” later.  Been there , done that already and I’ve only been karting 2.5 years now.  Yes it’ll be roughly $5500 – $6000 but I’m being honest.  Spend a couple $$ upfront to save later.

      Also, IMHO, don’t buy a Rotax, they are now a thing of the past in the USA and at this point who is supporting the Rotax??  Again, in the NJ area, go with an X30, by far the most popular motor in the area and real easy to get IAME parts.  I’m not saying its the cheapest or most economical motor, but by far most common motor on karts in the NJ area.

       

       

Viewing 20 reply threads