Forum Replies Created

Viewing 13 reply threads
  • Author
    Posts
    • May 7, 2014 at 7:11 pm #27056
      B
      Participant

      Came off the kArt when I bought it. It may not be a ribtect. I dont have one to compare too.

    • May 4, 2014 at 7:58 pm #26855
      B
      Participant

      Bump. .. all prices obo. Would like to move some of this stuff

    • February 13, 2014 at 4:05 pm #21985
      B
      Participant

      Tires are YHB.

    • February 11, 2014 at 6:47 pm #21809
      B
      Participant

      Price reduced to $1000. Really need to move tho motor

    • August 20, 2013 at 9:42 am #7555
      B
      Participant

      Prices reduced! Need stuff gone!

    • August 20, 2013 at 6:08 am #7532
      B
      Participant

      How about make me a offer? I need to move this motor asap!

    • August 19, 2013 at 6:28 am #7431
      B
      Participant

      Price drop to $3000 for whole package

    • August 12, 2013 at 8:11 am #6755
      B
      Participant

      Jason, what’s a good ignition timing for this motor?

    • August 11, 2013 at 7:36 am #6690
      B
      Participant

      bump

    • August 4, 2013 at 5:08 pm #6011
      B
      Participant

      One more question. What kind of spark plug do you run and what gap. The guy gave me NGK iridium br10eg plugs and on the motor says .035 gap. Just curious of your thoughts on that.

    • August 4, 2013 at 7:35 am #5984
      B
      Participant

      thanks for the input jason. I will give it a shot in the coming weeks and see what happens. Good to know these motors run more lean. I would have tending to make it run richer. Thanks again for the advice

    • August 2, 2013 at 9:55 am #5819
      B
      Participant

      I’m going with ven99. Don’t have drilled rotors and from the pics I believe it is that style. thanks for the info.

    • August 1, 2013 at 5:56 pm #5725
      B
      Participant

      Well my calipers have allen screws to bleed. So they shoukd be ven99. Any chance they could be anything else?

    • July 31, 2013 at 1:19 pm #5474
      B
      Participant

      Thanks for the info. The guy I bought it from found his settings and this is what he was running.

      U7 needle

      130 main

      45 outer

      45 inner

      60 pilot

      Dp262 atomizer

      I know he was running competitive so it sounds leaned out to me. I’m looking for a more conservitive setup for now. What are your thoughts on that? Also what would be good settings for break in period? Thanks again for your help

  • Author
    Posts
Viewing 13 reply threads