Forum Replies Created

Viewing 13 reply threads
  • Author
    Posts
    • November 27, 2014 at 12:00 pm #37863
      Martin Colligan
      Participant

      https://www.dropbox.com/s/yapoxwtpgh6fo5s/RotaxEvo-Australia.pdf?dl=0&utm_content=buffer4f0d4&utm_medium=social&utm_source=facebook.com&utm_campaign=buffer

       

       

       

    • July 26, 2014 at 7:53 pm #30949
      Martin Colligan
      Participant

      In Master I’m 185 lbs and I’m about 4 lbs over the weight. At this point I can adjust with fuel.

       

      Also depending on kart brands it can change.

       

       

    • July 26, 2014 at 7:44 pm #30947
      Martin Colligan
      Participant

      Hey man do you have good compression ? Are you sure you did not blow the engine ?

      168 main jet is kind of lean. Do you recall the motor heating in the last laps ?

       

      If you got spark and Fuel it should start.

       

    • December 26, 2013 at 7:06 am #18405
      Martin Colligan
      Participant

      I use Pledge for cleaning frame and plastics … Cheap and the results are amazing !

       

    • December 12, 2013 at 7:49 am #17671
      Martin Colligan
      Participant

      Well I started this thread to see if any of you used the Disc and Pads combo … seems like people are buying the pads only.

      The lighter rotor is what i’m interested in …

      Any plans of having the front disc and pads available also ?

       

      Thanks !

    • October 4, 2013 at 5:50 am #12045
      Martin Colligan
      Participant

      Found thanks !!

    • August 19, 2013 at 6:04 pm #7497
      Martin Colligan
      Participant

      Well I was curious of ballpark jetting … I run about a 182-185 when temp is about 20 to 25 celcius and I can go up to 198 when 15 celcius …

       

    • August 19, 2013 at 1:45 pm #7474
      Martin Colligan
      Participant

      Can you send a pic at coli69@hotmail.com

      Thanks !

    • August 18, 2013 at 6:11 pm #7404
      Martin Colligan
      Participant

      I run Mojo’s … any suggestion on tire temp ? Is there a temp I should REALLY not achieve ?

      Thanks for your help !

    • August 18, 2013 at 6:08 pm #7403
      Martin Colligan
      Participant

      Prices of set screws are worth changing them when in doubt … I also use axle collars and this helps a lot …

       

    • August 15, 2013 at 6:20 pm #7169
      Martin Colligan
      Participant

      Keep us posted man !!

       

    • August 14, 2013 at 10:37 pm #7065
      Martin Colligan
      Participant

      This is what i use ..Have a mychron on my other kart and this is the best one by far ….

      try and find a used one …

    • August 13, 2013 at 1:28 pm #6924
      Martin Colligan
      Participant

      So you did not try the Disc in combination with the pads ? Sorry i’m a bit confused ….

       

    • August 13, 2013 at 1:21 pm #6922
      Martin Colligan
      Participant

      Did you guys use the Frixa pads also ?

       

  • Author
    Posts
Viewing 13 reply threads