Forum Replies Created
-
AuthorPosts
-
-
April 8, 2018 at 4:28 pm #93484Jeff KarauParticipant
Interested, sent txt
-
April 5, 2018 at 9:18 pm #93258Jeff KarauParticipant
Hi Frank,
Sent you a text about the Mychron 5 2T
-Jeff
-
March 17, 2018 at 1:48 pm #92188Jeff KarauParticipant
Do you have the split temp cable? Sensors, temp sensors, which ones?
Can reply to kart @ joinbeta.com
-
January 18, 2018 at 6:34 pm #90277Jeff KarauParticipant
Sorry, I didn’t see your reply. Yes I am still in the market, shoot me an email and let me know what you want for it.
kart at joinbeta.com
-
September 8, 2017 at 11:24 pm #85643Jeff KarauParticipant
Do you still have the Leatt neck brace? I am interested…
-
June 21, 2014 at 1:39 am #29222Jeff KarauParticipant
If it was on a CRG RR, it’s 90mm. Just had to buy new brackets for my mount and they are 32-90.
-
June 14, 2014 at 10:10 pm #28944Jeff KarauParticipant
I bought a 2008 CRG RR at the end of last year. Most of the kart was in good shape, bottom of frame had some off track scratching and the floor pan was pretty beat up, but the kart was in pretty good shape. Ask about last time motor (if not roller) was rebuilt and when the last time brakes were done and look at the rotors/pads to see if that looks to be about the same amount of time. Those gave me a good idea that the guy had done his maintenance on the kart, rotors looked good and he said he replaced it when the motor was done, 6 hours ago (according to MyChron) so the whole story fit with the condition of the kart.
Not sure about life being left in it, if it’s straight and not beat on, I’d expect to get some years of service out of it. I don’t expect to run at the front of the pack in S1 but I have seen guys in older karts than that best the newer CRG chassis. So I’d say it’s a great place to start in learning to drive a shifter.
-
-
AuthorPosts







