Forum Replies Created

Viewing 4 reply threads
  • Author
    Posts
    • June 2, 2015 at 4:59 am #49195
      Tyler Howard
      Participant

      Hey Everyone,

      Thanks for the feedback. I am most likely due for a rebuild on my brakes. Steen, that’s what I initially thought when I came off track, so I made it a point not to touch them unless needed. It’s a little distracting when I’m setting up for a turn but I’m hoping that will go away with experience.

      Thanks again guys, you’re awesome.

    • January 14, 2015 at 1:30 pm #40460
      Tyler Howard
      Participant

      OKay, I talked with Jesus at P1 engines, he also said it sounds like an air leak. He told me to start with the gasket on the reed cage so Im going to look at that now. Greg, I will check the crank seals if thats not the issue, thanks for the advice ! Ill get back with you guys shortly.

    • January 13, 2015 at 2:08 pm #40394
      Tyler Howard
      Participant

      Walt, thanks for the advice its helped alot. Tony, I rebuilt the carb now it wont start unless I choke it by placing my hand over the carb. Once it starts I have to keep my hand somewhat over the carb to keep it from reving to infinity. I tried adjusting the carb door and it appears to be closed all the way; same idling issue. If I hold my hand like halfway over the carb it idles . Starter seems to be okay. Any ideas ?

    • January 12, 2015 at 12:15 pm #40339
      Tyler Howard
      Participant

      How many hours are on it ?

    • January 11, 2015 at 11:52 am #40263
      Tyler Howard
      Participant

      Hey Tony,
      Thanks for the fast response! I will be doing the rebuild in a couple of hours and will let you know how it goes.

  • Author
    Posts
Viewing 4 reply threads