Forum Replies Created

Viewing 2 reply threads
  • Author
    Posts
    • February 1, 2016 at 9:34 am #60391
      Momo Stalion
      Participant

      Just an update, looks like the spindle was an incorrect model installed on my kart.  Took measurements against a different CRG kart, size is 5mm closer.

      What was installed on my kart is likely for a VEN04 as the mount is further out, a new set of spindles for ven05 brakes on the way.

    • January 30, 2016 at 10:23 am #60214
      Momo Stalion
      Participant

      Thanks again for the reply James. I didn’t post it to keep the post length down but those are brand new Frixa rotors and pads. That was the brake work I did along with rebuild on calipers and rotor floating pins.

      I compared them to the stock CRG rotors and pads and they are the same physical diameter.

      Came back out to the kart track and taking some measurements right now. Comparing to another crg they have here in storage.

    • January 30, 2016 at 8:21 am #60205
      Momo Stalion
      Participant

      Thanks for the reply James.  Do you think the spindles could be wrong?  Only thing I can think of since the caliper mounting points only allow the caliper to sit at that one position.

  • Author
    Posts
Viewing 2 reply threads