[John Baker]

Ttt, looking in the range of $300 for two Mychron 3s if possible.  Thanks.

[John Baker]

Ttt

[John Baker]

Bump, need these parts asap

[John Baker]

Bump, also need some other small parts like chain guards, chains, and sprockets.

[John Baker]

Bump

[John Baker]

Bump, looking for a kart from 2001 and up.

[John Baker]

I checked the threads on the plug and they seemed ok, but they were definitely stripped on the master cylinder.  So what are my options now?  I really appreciate all the help.

[John Baker]

I’ll take a look when I get home, but if the screw is not stripped, then my options are to get a slightly bigger plug and drill it out or buy a new master cylinder?

[John Baker]

Guess I won’t try the O ring… considering it won’t tighten, is there the possibility that the master cylinder is toast, or could I fix it somehow?

[John Baker]

Thanks Tony, there is a washer, but I’ll definitely try the O-ring.  I forgot to mention, but the screw never sits tight, so I’m thinking it could be stripped threads, not sure if it is the plug or if it is the threads on the actual master cylinder.

[John Baker]

Just added pictures

[John Baker]

Bump, I also have the seat, it is being cleaned

[John Baker]

Bump

[John Baker]

Bump

[John Baker]

Thank you so much for the info, I’ll look into putting a tube there, but with clamps or some other way to secure it other than welds.  I appreciate all the help guys, anything is appreciated, I guess I should either look for a new kart or for a jackshaft. – John

[John Baker]

Thank you for all the help, I really appreciate it.   I will try to mount a KT100, and if it is too inconvenient, I will buy/sell the chassis for a 4 cycle CIK Kart. – John

[John Baker]

Thank you so much, and btw just making sure (it’s my main concern), the Tony Kart rail spacing is about 120mm correct?  That’s why I was worried about international mounts.  Also, do I bend the seat strut next to it, or cut it and buy an adjustable seat strut?  (Btw, I haven’t secured the axle yet, I’m cleaning the kart slowly and replacing some old bolts)

[caption id="" align="alignnone" width="480"] Motor Mount[/caption]

[John Baker]

Bump

[John Baker]

Bump

[John Baker]

I need one in the sub $75 range

[John Baker]

Please delete

[John Baker]

Thanks eKartingNews

[John Baker]

Bump

[John Baker]

Bump

[John Baker]

Bump

[Author]

Posts