Forum Replies Created

Viewing 5 reply threads
  • Author
    Posts
    • November 12, 2013 at 5:03 pm #15426
      Charles Stuart
      Participant

      Vince, I got the Eagle Eye’s today. Thank you!

    • November 10, 2013 at 8:42 am #15180
      Charles Stuart
      Participant

      My vent tube is not plugged and the inlet is not restricted. Ill see what I can do, thanks again.

    • November 8, 2013 at 8:31 pm #15119
      Charles Stuart
      Participant

      Thanks Gerry. The overflow happens with the tank cap on or off. I took the carb back off and have it on the workbench right now. I can tap the return pick up down but I’m not sure how far or where it should be. I’ve tried googling for pictures but no luck.

    • September 23, 2013 at 9:36 am #10529
      Charles Stuart
      Participant

      http://www.hillcountrykartclub.com/index.php/club-news/item/16-more-than-just-the-pain-of-a-stolen-kart

    • August 11, 2013 at 1:20 pm #6706
      Charles Stuart
      Participant

      …

    • July 23, 2013 at 9:20 pm #4676
      Charles Stuart
      Participant

      Thanks guys I have new brushes on order. I do have an external but I’d like to have the starter working for the reasons already mentioned.

    • November 10, 2013 at 7:45 am #15176
      Charles Stuart
      Participant

      (I already tapped it down a little bit but stopped when I realized I didn’t know exactly where it needed to be.)

      Thanks

    • October 24, 2013 at 10:33 am #13675
      Charles Stuart
      Participant

      Yes you will need to get it registered. Harbor Freight will give you the paperwork you’ll need. Here in Texas you get it registered at the tax assessor-collector office.

      I’ve used the harbor freight trailer for a few months now, which include a ~1000 mile trip. No complaints at all. The rear track will hang off a little but as long as you have it strapped down tight, you shouldn’t have any problems. You could also build a wider platform if you don’t like it hang off the sides. I’m planning on doing that and maybe a second platform for another kart.

      I did not enjoy putting it together (hot a$$ garage) and probably would have paid a little more for something pre-built. One issue I had was a poor ground for the brake lights. Even though I had continuity, one of the brake lights would not work. I had to sand off the paint at the back of the trailer where the brake light bracket meets the frame.

       

  • Author
    Posts
Viewing 5 reply threads