Forum Replies Created

Viewing 10 reply threads
  • Author
    Posts
    • June 26, 2015 at 2:44 pm #50597
      Nick Esguerra
      Participant

      bump

    • May 22, 2015 at 9:55 am #48724
      Nick Esguerra
      Participant

      Russ,

      Try the following.  Disconnect the line going from the tank up to the fuel pump and blow to see if there is an obstruction there, especially if you are running a filter.  If that works then connect it back and disconnect the line going into the carb.  If that still works then your problem is in the carb. You said that you tried 3 carbs and fuel pumps so probably the problem is not there, but common mistakes are floats that are upside down or the carb filter plugged up.

      Take the filter out and inspect for blockage and recheck the floats are in the correct orientation.  An easy check that you can use is lightly shaking your carb after putting it together and making sure the floats rattle.  If they don’t the floats are upside down.  Less likely is that your lever arms are stuck closed for some reason, or your needle is stuck.

      BTW, 1.5 to 2 turns on the air screw is what most people run.

    • May 13, 2015 at 1:12 pm #48145
      Nick Esguerra
      Participant

      Price reduced again!

    • April 10, 2015 at 4:45 pm #45844
      Nick Esguerra
      Participant

      Updated with new price and pictures.

    • April 2, 2015 at 3:42 pm #45312
      Nick Esguerra
      Participant

      Updated

    • March 31, 2015 at 12:51 pm #45150
      Nick Esguerra
      Participant

      Price Reduction

    • March 10, 2015 at 11:10 am #43744
      Nick Esguerra
      Participant

      Huge Price Reduction

    • May 13, 2014 at 1:40 pm #27424
      Nick Esguerra
      Participant

      Sr. size.

      130mm/210mm

       

    • May 8, 2014 at 3:21 pm #27138
      Nick Esguerra
      Participant

      Still need them!

    • March 26, 2014 at 10:47 pm #24568
      Nick Esguerra
      Participant

      All e-mails and PMs replied

    • February 20, 2014 at 10:24 am #22346
      Nick Esguerra
      Participant

      Still available

    • March 4, 2014 at 12:18 pm #23192
      Nick Esguerra
      Participant

      Reduced Price.

    • February 25, 2014 at 4:27 pm #22728
      Nick Esguerra
      Participant

      Yes, still available.

    • January 29, 2014 at 1:04 pm #20603
      Nick Esguerra
      Participant

      Happened to catch this, obviously if you only intend to use it for autocross it may work.  Very experimental, but cool nonetheless.

       

    • January 28, 2014 at 3:00 pm #20522
      Nick Esguerra
      Participant

      Yes it is still available, let me know if you have any questions.

  • Author
    Posts
Viewing 10 reply threads