[Colin Smith]

Hi Viven,

We’ve not had a keycode arrive? I’ve emailed you but if you could resend to my email address, I’ll get it sorted for you.

Best Regards,

Colin

[Colin Smith]

Hi Ambrose,

If you have Jet-Tech PRO then you can use it to correctly setup the Rotax EVO now!

Could you PM me your current email address and I will email you all the information that you need.

Regards,

Colin

[Colin Smith]

Gentlemen,

We are very much in business!

Curt, please check your email inbox!

Enzo, thanks for coming back to me. Will be in touch shortly.

Best Regards,

Colin

[Colin Smith]

http://www.rotaxjetting.com website is now back on-line and the email service restored.

[Colin Smith]

John, Scottie and Steven.

The problem is with our ISP/hosting company. We are working on it with them as a matter of urgency so the website and email service will be back up shortly.

Colin

[Colin Smith]

Hi Matt,

Short answer is Yes!

Like any combustible, there is a specific ratio of gasoline to oxygen that gives the optimum explosive mixture – in our case, the optimum mixture to enable the engine to deliver maximum power.
As air density changes, the volume of oxygen in the air changes so you need to change the main jet size in order to allow the carburettor to deliver the correct amount of fuel, to maintain the correct ratio and therefore maximise performance.

There is a lot more to correctly setting up the carburettor and getting the best performance from your engine, such as needle clip position, needle profile, float weight, float height etc.

Have a look at these articles, they may be of some help:

http://www.rotaxjetting.com/Jetting.htm

http://www.karting1.co.uk/new-ThePreparation&JettingoftheRotaxCarb.pdf

Colin

[Colin Smith]

Hi Steven,

The Jet-Tech license is for a single computer at a time. The keycodes are encrypted as is the software license registration so the usual process to transfer the software to another computer requires a new keycode generated from both computers (old and new), which we need to process together in order to generate a new activation password, for the new computer!

I’ve sent you an email with the information that you require but please come back to me if you need any help or have further questions.

Colin

[Colin Smith]

Hi Scottie,

Apologies for the delay getting back to you. We are very much in business! A lot of stuff has come in over the holiday and I’m working through it asap. With regard to your transfer request, we’ve not received a new keycode from you as yet so I’ve emailed you with the info you need to complete the license transfer. Please check your inbox and come back to me if you need any help.

Colin

[Author]

Posts