Forum Replies Created
-
AuthorPosts
-
-
October 16, 2017 at 3:59 pm #87207Chris BraunlichParticipant
Wheels are sold. Bump for lower price on seat. $75 shipped is a great deal when the condition of this seat is as good as new with just mounting holes.
-
September 29, 2017 at 9:39 am #86512Chris BraunlichParticipant
Updated pricing and added two more front spindle wheels. Make me an offer!
-
September 14, 2017 at 2:07 pm #85929Chris BraunlichParticipant
Bump now on enay with photos. 600 or best offer
-
September 8, 2017 at 1:45 pm #85636Chris BraunlichParticipant
Bump for updated prices
-
September 8, 2017 at 1:43 pm #85633Chris BraunlichParticipant
Bump for lower price
-
July 30, 2017 at 4:15 pm #84238Chris BraunlichParticipant
-
July 24, 2017 at 8:43 am #83964Chris BraunlichParticipant
Very interested in wheels. Can you email me at cjb25hs@gmail.com
-
March 26, 2017 at 12:44 pm #79735Chris BraunlichParticipant
We are total Kart newbies, new to karting but I have road raced for over 10 years, so what would we do to loosen chassis up? Feedback from both of my sons was that they were not experiencing any hoping or strange handling characteristics.
We are turning in the 15K-15.4K range and on well worn Bridgestones and only the second outing we are only 4 seconds off the pole at the last race at same track with all the racers on brand new MG yellows so I assume there is at least 1-2 seconds just in tires.
We have been purging the air at the head so I do not think that is it. Water level is filled to just below the neck to allow for some expansion. The cap I noticed is holding pressure so that may be a cause, I can blow air out the inside of the cap thru the relief hose but not thru the hose end out the inside of the cap.
Before next weekend my plan was to install a brand new pump and belt setup, new sprockets and new chain and align everything fresh.
-
-
AuthorPosts







