Vincent Ciolino

Forum Replies Created

Viewing 16 posts - 1 through 16 (of 16 total)
  • Author
    Posts
  • July 6, 2015 at 6:05 am in reply to: Micromax fuel delivery and rev problem #51012
    Vincent Ciolino
    Participant

    I would start with replacing/rebuilding the fuel pump.  Are you using the throttle stop?

    June 11, 2015 at 1:09 pm in reply to: Rotax mini evo upgraded motor bogs and dies. Help? #49742
    Vincent Ciolino
    Participant

    Are you using the new throttle stop sleeve that they just started to include with the upgrade kits?  Also, make sure that you are using rubber mounts on both the ECU and Coil.  I did not have one on the coil and it shorted out, it actually melted and was replaced by warranty.  I noticed the new throttle sleeve resolved a lot of the carburetor issues.

    May 1, 2015 at 8:01 am in reply to: Let's rehash micros #47350
    Vincent Ciolino
    Participant

    Just got word a bulletin will be released to address the additional part

    May 1, 2015 at 8:00 am in reply to: Rotax EVO parts failing? #47349
    Vincent Ciolino
    Participant

    Aww now we know the reason for the mysterious piece.  A bulletin will be coming out shortly to address this.

    May 1, 2015 at 6:06 am in reply to: Let's rehash micros #47343
    Vincent Ciolino
    Participant

    We received our kit and I have found a silver carburetor sleeve so I assume we are supposed to be using one now?  Anybody else get one with there kits?  I sent an e-mail to Maxspeed asking this same question.

     

    April 30, 2015 at 7:26 am in reply to: Evo Upgrades #47275
    Vincent Ciolino
    Participant

    We just got our upgrade kit.  What are the legal main jet sizes we can use?

     

    April 30, 2015 at 7:25 am in reply to: Evo Upgrades #47274
    Vincent Ciolino
    Participant

    <span style=”font-size: 11.0pt; font-family: ‘Calibri’,sans-serif; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: ‘Times New Roman’; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;”>Just got our upgrade kit.  What are the legal main jet sizes that I can use in the MicroMax class ?  And what is the recommended size for Florida?</span>

    March 20, 2015 at 10:08 am in reply to: Evo Upgrades #44496
    Vincent Ciolino
    Participant

    Last I heard the update kits for the Micro’s are on back order.  They are working on the 02/20/2015 orders.

    March 12, 2015 at 7:48 am in reply to: Questions????????? #43898
    Vincent Ciolino
    Participant

    With Rotax you need to ease into the throttle.  It is not an on/off type carburetor however, there is talk that with the new updated carburetor it is supposed to be more on/off but I cannot confirm that.

    March 6, 2015 at 10:32 am in reply to: What kind of bolt is used for putting on weights? #43520
    Vincent Ciolino
    Participant

    If mounting them to the seat I use this kit.

    http://cometkartsales.com/Lead-Weight-Flat-Head-Bolt-Kit-with-Clip.html

     

    March 6, 2015 at 7:22 am in reply to: micro max / tony kart enging mount #43503
    Vincent Ciolino
    Participant

    Give Comet Kart Sales a call and let them know what you have.  They will steer you in the right direction.

    February 19, 2015 at 8:05 am in reply to: Kart Life TV Show #42620
    Vincent Ciolino
    Participant

    Heard some dad say “I don’t do tuning I just write checks”   I find working on our kart a lot more fun than writing checks..lol

    February 12, 2015 at 1:27 pm in reply to: micro max / tony kart enging mount #42163
    Vincent Ciolino
    Participant

    Angled is the recommended mount

    January 20, 2015 at 2:00 pm in reply to: Bleeding your brakes #40778
    Vincent Ciolino
    Participant

    Thanks for the info Tony.  I find I am having to bleed them every race/practice.  I swapped out the seals this off season so I was hoping that would reduce the need but even with it sitting for a week or two they still need bleeding.

    January 13, 2015 at 8:30 am in reply to: Best method for securing kart in enclosed trailer #40382
    Vincent Ciolino
    Participant

    Thank you everyone for the feedback, it has been very helpful.  I went ahead and installed an e-track system and I think that will secure everything safely.  Thanks again!

    -Vincent

    January 7, 2015 at 11:35 am in reply to: Best method for securing kart in enclosed trailer #40042
    Vincent Ciolino
    Participant

    Thanks for the tips.  I have folding stand, streeter I believe.  Would securing the kart to the stand and securing the stand via E Track be safe?  I have seen some do this but am afraid of it falling of the stand during transport.  I thought about using a vertical  stand and strapping it to the wall but I don’t know if the trailer will have that much room.

  • Author
    Posts
Viewing 16 posts - 1 through 16 (of 16 total)