steve vermeer

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • September 14, 2015 at 8:12 am in reply to: 206 CUP #54221
    steve vermeer
    Participant

    Shawano this weekend guys! Great track, one of the nicest facilities in karting! Friday practice, Race Sat/Sun. Last points race for 206 cup and we have some great stuff to give away!!

    August 18, 2015 at 11:07 am in reply to: 206 CUP #52998
    steve vermeer
    Participant

    206 Cup is at Concept Haulers this weekend! Aug 22-23. See you there!

    July 9, 2015 at 7:22 am in reply to: 206 CUP #51203
    steve vermeer
    Participant

    If we get enough pre-entries for a 206 heavy class for the Eau Claire race, we’ll make a class for the “bigger boys” to play. Get signed up! Information on the website 206 cup.com.

    June 26, 2015 at 12:24 pm in reply to: 206 CUP #50591
    steve vermeer
    Participant

    Get ready for this, for the next 206 cup race at Eau Claire Wi. If you pre-register for both days, Briggs and Stratton will PAY FOR your Saturday entry!!

    Details coming this weekend!!!

    June 22, 2015 at 1:21 pm in reply to: 206 CUP #50339
    steve vermeer
    Participant

    We had 59 karts on Saturday and 57 on Sunday, started 30 for the main on Sunday in 206 senior!

    Gave out a lot of product at drivers meetings both days. A huge thank you to Briggs and Stratton and Dave Klaus for being there both days! Thanks to all of our series sponsors for a great weekend. Especially to Bob Vehring, Jim from Faster Motors and Dave Klaus for taking the time for pictures and autographs with fans!!

    April 23, 2015 at 2:48 pm in reply to: 08 OTK TAG chassis, cannot make it work #46723
    steve vermeer
    Participant

    Me too Jim, I find myself a little “cranky” sometimes..

    April 23, 2015 at 11:30 am in reply to: 08 OTK TAG chassis, cannot make it work #46694
    steve vermeer
    Participant

    $400 !

    April 23, 2015 at 7:34 am in reply to: 08 OTK TAG chassis, cannot make it work #46680
    steve vermeer
    Participant

    $350 and I’ll pay shipping…

    April 22, 2015 at 9:33 am in reply to: 08 OTK TAG chassis, cannot make it work #46594
    steve vermeer
    Participant

    Have another big fella in my area who races a kosmic with a world formula on it. He said the install wasn’t bad at all. Call him 612 724 3697, ask for Mark if you are really interested in doing this, otherwise as Gary said, stop whining..

    April 22, 2015 at 9:28 am in reply to: 08 OTK TAG chassis, cannot make it work #46592
    steve vermeer
    Participant

    The chassis is not worth a penny LESS than it was before! In fact it probably increased in value with the 206 on it! There’s almost no place to race a tag or 2 cycle kart in my area so they’re a dime a dozen.

    April 22, 2015 at 7:58 am in reply to: 08 OTK TAG chassis, cannot make it work #46582
    steve vermeer
    Participant

    I have both an ’07 arrow and a ’06 birel and I can say the problems of mounting a 206 take some time.I have removed the third bearing carrier and a bit of the frame for more room, tweaked the seat struts,and I’m able to get me AND my XL seat in both! As far as affecting the karts handling, they are faster than I am and I’ve got a lot of catching up to do.Smiles per gallon.

    April 17, 2015 at 12:46 pm in reply to: Cut third bearing to mount LO206? #46255
    steve vermeer
    Participant

    I nipped the carrier and some unnecessary frame tubing off of my arrow.Removed about 4 1/2 lbs and made a bunch more room to work.Kart races better than I do…

    April 14, 2015 at 6:43 am in reply to: 206 temps #46004
    steve vermeer
    Participant

    You are giving away a small bit of compression with the temp sensor, not much. Your best adjustments will be in needle height to change the mixture. There is no “ideal” temp, tune for the day and whatever makes the best laptimes! Check out Faster Motors for the carb tuning tools you will need. Float height gauge and jet tool will make life a lot easier!

    April 9, 2015 at 12:12 pm in reply to: Time for a change #45783
    steve vermeer
    Participant

    Jim, I think I might be “suspended” again after yesterday.Oh well, enough of the “cloneheads”.

     

    February 14, 2015 at 1:09 pm in reply to: 2015 LO206 Program #42284
    steve vermeer
    Participant

    For the 206 cup, if you are running gold cup bodywork 50″, if C.I.K. then 55″.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)