Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: OTK brakes loosing pressure? #49195
    Tyler Howard
    Participant

    Hey Everyone,

    Thanks for the feedback. I am most likely due for a rebuild on my brakes. Steen, that’s what I initially thought when I came off track, so I made it a point not to touch them unless needed. It’s a little distracting when I’m setting up for a turn but I’m hoping that will go away with experience.

    Thanks again guys, you’re awesome.

    in reply to: Leopard doesn't want to start, need advice #40460
    Tyler Howard
    Participant

    OKay, I talked with Jesus at P1 engines, he also said it sounds like an air leak. He told me to start with the gasket on the reed cage so Im going to look at that now. Greg, I will check the crank seals if thats not the issue, thanks for the advice ! Ill get back with you guys shortly.

    in reply to: Leopard doesn't want to start, need advice #40394
    Tyler Howard
    Participant

    Walt, thanks for the advice its helped alot. Tony, I rebuilt the carb now it wont start unless I choke it by placing my hand over the carb. Once it starts I have to keep my hand somewhat over the carb to keep it from reving to infinity. I tried adjusting the carb door and it appears to be closed all the way; same idling issue. If I hold my hand like halfway over the carb it idles . Starter seems to be okay. Any ideas ?

    in reply to: trade complete cr80 setup for water cooled 2 stroke package #40339
    Tyler Howard
    Participant

    How many hours are on it ?

    in reply to: Leopard doesn't want to start, need advice #40263
    Tyler Howard
    Participant

    Hey Tony,
    Thanks for the fast response! I will be doing the rebuild in a couple of hours and will let you know how it goes.

Viewing 5 posts - 1 through 5 (of 5 total)