Sid Danals

Forum Replies Created

Viewing 21 posts - 1 through 21 (of 21 total)
  • Author
    Posts
  • November 15, 2016 at 6:30 pm in reply to: Daytona 2016 #74273
    Sid Danals
    Participant

    Bobby,

    We plan to bring two PVP/PVP252, Anderson/PVP251, Anderson/Rotax256,

    a Cuthbertson laydown/Pavesi, a Lynn/Pavesi, 1st kart/FR125 Rotax,

    currently.

    Sid

    November 12, 2016 at 5:19 am in reply to: Daytona 2016 #74141
    Sid Danals
    Participant

    We’re coming down with a truck full of whoopass!

     

    September 21, 2016 at 7:33 pm in reply to: Atlanta Motorsports Park #71953
    Sid Danals
    Participant

    We were treated like family from the club members @ AMP from the time we arrived, until the final trailer was loaded and headed toward the gate!

    The facilities @ AMP were very accommodating, kuddo’s to Buddy and the whole WKA staff for pioneering the Grand National event!  The track is a “roller coaster” to quote Andy Kiker, literally, with four story elevation changes and some of the most technical twists and turns imaginable.

    The course is 16 turns with one main straight over a hillside to a sic 180 degree left turn 1, and a half mile sweeper that will test your stamina, there were also many golfer’s in the rough, but no track incidents for the entire event!  (the sandmen will get this, lol)  This track produced some of the best racing of the season, with several close finishes, and last lap lead changes!

    The Unlimited Class was a spectacular climax to the end of Saturday racing with a 0.067 sec margin of victory, by two of the finest drivers in the business.  The crowd gathered swiftly to cheer them on in the upper deck on the paddock!  Darrin Cuthbertson and Andy Kiker swapped the lead several times before the race being decided on the final lap, what a race to the flag!

    Congratulations to both Darrin and Andy for making memories for all of our families!  [Look for youtube posting of videos.]

    I was fortunate enough to follow these two lap after lap, thinking to myself, how are they able to breathe?  Need to boost the stamina for the next visit!

    The B-stock race also produced some great racing , with the top three driver’s reversing the finishing order on the last lap as well!  Nail biter!

    After speaking with several driver’s, all came to the same conclusion that we should come back for future events.

     

     

    August 10, 2016 at 4:53 pm in reply to: Where can I watch European Superkarting Championship? #70297
    Sid Danals
    Participant

    http://www.mototvnetwork.com

    August 10, 2016 at 4:52 pm in reply to: Where can I watch European Superkarting Championship? #70296
    Sid Danals
    Participant

    MotoTV

    <span class=” fz-15px fw-m fc-12th wr-bw lh-15″>www.<b><b>mototv</b></b>network.com</span>

    August 4, 2016 at 3:06 pm in reply to: looking for my first 250cc kart chassis #70074
    Sid Danals
    Participant

    I also have two Anderson karts that would easily accommodate either a 450 single or 250 twin.  Either one can be sold as complete roller, just bolt on engine and go!  Both karts are currently participating in AKRA and WKA events and are located in Ohio.

    March 31, 2016 at 4:05 am in reply to: Tag question #63670
    Sid Danals
    Participant

    Tony,

    Just picked this kart up, it was a display kart, all stock.

    I know very little about the TAG configuration, but I would like to replace/rebuild the clutch before I put it on a track. I am sure that I will need at minimum a few bell housings, and sprockets.
    The reason for my question is whether or not there are different clutches for road racing apposed to sprint racing, different springs, shoes, etc., or whether the stock clutch is all she wrote.

    This kart will be used by April initially, then I plan to make it available for arrive and drive for qualified drivers in the future.

    Another question for you, does the TAG class require two braking systems as well?

    Thanks for your help,

    March 25, 2016 at 7:20 pm in reply to: Mid-Ohio Test and Tune 21 April 2016 #63386
    Sid Danals
    Participant

    Mike,

    I am assuming the $195 is per driver, and/or is there any limit on number or type of karts?  i.e. shifter, enduro, sprinter, vintage, etc.

    What is the cutoff date for registering?

    Like the idea of being able to participate, and spreading the word . .. .

    Sid Danals

    November 29, 2015 at 7:01 pm in reply to: Superkarts at Daytona #57361
    Sid Danals
    Participant

    Johnny,

    Darrin Cuthbertson & I will be there!

    Sid Danals

    November 19, 2015 at 5:12 am in reply to: Used Hoosier Tires #56917
    Sid Danals
    Participant

    Rene,

    Do you have any sets left?

    Sid Danals

    November 8, 2015 at 5:32 am in reply to: Sniper V2 Alignment System #56356
    Sid Danals
    Participant

    Randy,

    Is the transponder still available?

    Thanks,

    Sid Danals

    November 8, 2015 at 5:28 am in reply to: MyChron3 GOLD – SOLD #56355
    Sid Danals
    Participant

    Stu,

    Do you still have the Mychron 3 gold?

    If so, can you shoot me a pic @ 614-578-1617?

    Thanks,

    Sid

    November 1, 2015 at 4:16 am in reply to: WTB: Pavesi parts #56116
    Sid Danals
    Participant

    Mike,

    Try contacting Brian Wilhelm, you may get his contact info via swedetechracing.com

    He is known for building Pavesi rocket ships!

    Sid Danals

    September 3, 2015 at 6:40 pm in reply to: Getting out of karting huge sale, Superkarts, GASGAS, CR250, CR 125 #53835
    Sid Danals
    Participant

    Do you have a breakdown of the karts, engines, etc. with photos, age & pricing?

    I have recently acquired a pair of ’08 Anderson karts with the formula wheel package as well, could always use backups. .. .

    Best Regards,

    Sidney Danals

     

    July 4, 2015 at 3:50 am in reply to: Complete Pavesi ICC engine SOLD! #50957
    Sid Danals
    Participant

    Keith,

    How much time is currently on motor since fresh?

    Sid

    June 25, 2015 at 7:05 pm in reply to: 2 VINTAGE Zip shifter kart chassis' #50533
    Sid Danals
    Participant

    Joe,

    I sent a few photos to your cell, the second kart is just the frame, and is in a storage crate . .. .

    Sid

    April 6, 2015 at 9:09 am in reply to: Wanted PAVESI 125cc or PVP 250cc #45512
    Sid Danals
    Participant

    Glenn,

    Is the motor fresh? Can you send me some pics?  sidthesquid82@yahoo.com

    March 31, 2015 at 7:22 pm in reply to: Wanted PAVESI 125cc or PVP 250cc #45195
    Sid Danals
    Participant

    I have located two so far complete, however, give me the details on yours,

    I can always use spares. ..

    February 22, 2015 at 4:22 pm in reply to: Thanks E-Karting! #42826
    Sid Danals
    Participant

    Daniel,

    I am located in the North Central Ohio area near Mid-Ohio Sports Car Course.

    The 80cc will be for my wife’s sprint kart, let me know what you would have to have for the motor complete with exhaust, with or without cooling system, or however you would like to sell. . ..

    Best Regards,

    Sid Danals

    (614) 578-1617

     

     

    February 22, 2015 at 10:34 am in reply to: Thanks E-Karting! #42816
    Sid Danals
    Participant

     

     

    February 22, 2015 at 10:33 am in reply to: Thanks E-Karting! #42815
    Sid Danals
    Participant

    Jeff,

    Thanks for the info,

    I am located in Ohio, 20 min. from the Mid-Ohio Sports Car Course.

    I will be putting together a 125cc laydown for the 2015 season and plan to complement it with a 250cc superkart by the 2016 season.

    My wife will be piloting an 80cc shifter sprint kart as well.

    If you know of any PVP’s available in the US, please let me know, or share my info.

    I will be returning to karting after a 15 year abscense, racing dirt Modifieds & Late Models.

    April & I will be attending the Dart Kart series events this season to participate.

  • Author
    Posts
Viewing 21 posts - 1 through 21 (of 21 total)