Forum Replies Created
-
AuthorPosts
-
Ron ArtingerParticipant
Hubs are 50mm in length.
Thanks,
Ron
Ron ArtingerParticipantbump
Ron ArtingerParticipantNo, it has 3 holes per side for ackermann adjustment.
Thanks,
Ron
Ron ArtingerParticipantsent you an email. Thanks!
Ron ArtingerParticipantbump for price drop.
Ron ArtingerParticipantbump for price drop.
Ron ArtingerParticipantbump for price drop.
Ron ArtingerParticipantHubs are still available.
Ron ArtingerParticipantSpindles have been SOLD.
Ron ArtingerParticipantBump for price reduction.
May 18, 2016 at 1:41 pm in reply to: Tricks to cleaning kart. Some tricks I have found, and others not so much #66145Ron ArtingerParticipantMagic erasers work really well on body work and the frame. But they don’t last long so you may need quite a few.
-Ron
October 2, 2014 at 8:14 am in reply to: Should the engine turn when spinning the rear wheel by hand? #34782Ron ArtingerParticipantNo, it should not spin the motor when off. I had the same issue when I first moved to a KT100 and clutch. If there is a a spacer, you may need to sand it down a bit – at least that is what was wrong in my case. If the starter nut is coming off, check the bearing in the 3rd mount. If it is not spinning freely then it can cause the starter nut to back out. This ruined my race weekend a couple months back.
Good luck!
Ron ArtingerParticipantHi Gary – What brand/compound/size are the slicks?
Ron ArtingerParticipantHow much are you asking?
Ron ArtingerParticipantbump
Ron ArtingerParticipantPMed on the YLCs.
Ron ArtingerParticipantHey David. I saw one on eBay the other day that looked good. I think karting-7 was the seller.
Good luck.
Ron ArtingerParticipantPMed you on the wheels.
Ron ArtingerParticipantNow if someone only had this kind of info for V05 calipers…and the master cylinder : )
CRG must make half their profit form these rebuild kits.
-Ron
Ron ArtingerParticipantHi Jimmy,
how much are you asking for the wheels?
Ron ArtingerParticipantRon ArtingerParticipantBarry,
can you send pics of the air box mounting kit and also the seat. Is it the standard or soft model? Ron.artinger@gmail.com
Ron ArtingerParticipantStill for sale?
Ron ArtingerParticipantI will take a caliper rebuild kit. what color are the wheels? Can you send pics of the wheels and hubs? Ron.artinger@ gmail.com.
Ron ArtingerParticipantIs the rear caliper a CRG V05? Also, what is bolt pattern on the wheels standard metric or CRG pattern?
Thanks!
-
AuthorPosts
Archives
