Forum Replies Created
-
AuthorPosts
-
Sebastian SarmientoParticipant
Hi Mark,
what exactly are you including with 1000 option. I’m new to the KT100 so take it easy on me.
Third bearing?, pipe? what pipe? carb?
Thanks.
Sebastian SarmientoParticipantwheels still available?
Sebastian SarmientoParticipantbump
Sebastian SarmientoParticipantHappy New Year! The engine still available.
I have another leopard package my07 that has 45minutes on it since the last rebuild, brand new never used clutch and drum installed and rebuilt carb.
if you are serious about racing that engine would be more like it.
The package for sale still very strong, as it has a rebuilt carb as well and about 8hs on it.
the ideal thing would be to have and engine for practice and the other one for racing (a lot less rebuilds, will save you money at the end and you will always have a very competitive engine ready to go) but of course, that’s only when the budget allows it.
€100 doesn’t seem bad at all for an engine to get there.
December 27, 2014 at 7:46 am in reply to: OTK new spindle set 10x25x110 with brake caliper mount #39419Sebastian SarmientoParticipantBump
Sebastian SarmientoParticipantDELETE
Sebastian SarmientoParticipantThank you all guys!!
you guys are amazing!! I agree with the ask Freddy button haha!lol.I’m writing all down and I’ll start hunting for a kt for practice, following Freddy’s advice, I’ll rent one package for the first race and see how it goes!!.
In case I don’t come up with another question during these days (I seriously doubt it) I would like to wish you ALL Happy Holidays!!
Sebastian SarmientoParticipantDELETE
Sebastian SarmientoParticipantDELETE
Sebastian SarmientoParticipanthey Raymundo, didn’t you just sold one leopard package?.
We almost had the same things for sale (Leopard package, Mychron 3 gold)
Sebastian SarmientoParticipantReading more I realized that the majority of people doesn’t want to hook this up to a 12v battery, especially (if you are running a TAG), the starter battery.
So far it seems that mostly people run it off the 9v battery in the Mychron, but they use better or higher in mAh batteries. Like for example the one below, which has 1,200mAh capacity
http://www.batterymart.com/p-bat-u9vl-fp.html
Most of the Duracell 9v batteries have about 560 mAh. 150% more capacity sounds pretty good… May be the way to go, although the most comfortable option, may not be the cheapest one on the long run. (about $8 each when a mighty max will last 3-5 years and it will cost $21).
I guess, like most of everything, it comes to preferences and the good thing is that either way you can always have a plan B if the battery dies at the wrong moment.
Thank you all for helping me understand the basics of this set-up!
Sebastian SarmientoParticipantHolly Molly, there are plenty of vids to watch, I may crack more than one lol. Thanks Matt.
Sebastian SarmientoParticipantThanks all,
Christian that means that the first guy wasn’t that far off. Interesting…. I found these ones, they last 3-5 years and are small enough, what do you think? Also not that expensive.
Let’s see what does the fox say…lol, no disrespect intended. Just kidding
http://www.ebay.com/itm/131376018931?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Sebastian SarmientoParticipantArai hemet sold. Letting the Icon go for 70 shipped!!!!
Sebastian SarmientoParticipantbump
Sebastian SarmientoParticipantthank Tony,
Your explanations are always great!!!This helps a lot!!!
Thanks man!! Just ordered a new M4 , A GPS (comes with dual data hub) and a Data key.
That should be more than enough for what I need right now.
Thanks again!!
Sebastian SarmientoParticipantstill available
Sebastian SarmientoParticipantbump. heading to Craigslist/ebay.
Sebastian SarmientoParticipantgot the decals today!!!! they are way better than how they look in their web!!.
I’ll post a pic as soon as I get them on my kart.
Sebastian SarmientoParticipantSure. I’ll send you some today
Sebastian SarmientoParticipantHi Mike,
These are the pics that I was talking about the other day. Check them out.
Click on the link it says “palos en karting” (there are two folders)
December 8, 2014 at 9:27 pm in reply to: OTK new spindle set 10x25x110 with brake caliper mount #38617Sebastian SarmientoParticipantBump $275 shipped. If they don’t sell in a week they will visit Ebay.
Sebastian SarmientoParticipantHi Kenneth I just saw this one here, may be what you are looking for
Brian Spek
ParticipantPair of Sniper Laser aligners for sale for camber/toe setup. Both are straight, no cracks etc. In cool weather below 70 degrees, one laser needs to be warmed up before it turns on. Placing it on my dashboard in the sun, or with the heater to warm it up at the track works ok. In the garage I use a hair dryer for a minute or two. It works around 70 degrees or more outside. The other one works fine hot or cold.
I’ve seen other guys with this similar issue. The one that is flawless is the left side, the right sided laser needs warming up…So if you have the same problem with your set, but would like a new left-side, here’s your chance!
Brian text 404-five seven nine-8413
Sebastian SarmientoParticipantI contacted them by email and they said the trade-in program would be back in January, is that correct or is it going now?
Sebastian SarmientoParticipantHey Freddy!,
lol, why not?, you have been a good friend and great help!!. Looking forward to race with you guys next year!.
-
AuthorPosts















