Aaron Abed

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 15, 2016 at 12:17 pm in reply to: IAME Mini Swift will not take off…..any advice #67286
    Aaron Abed
    Participant

    Now that’s one thing I/we didn’t check.   How did you correct on the Gazelle when you had the issue?

     

    June 15, 2016 at 11:15 am in reply to: 2013 PCR Cadet Roller for sale w/extras #67282
    Aaron Abed
    Participant

    BUMP!

    June 15, 2016 at 10:18 am in reply to: wtb mychron 4 data key #67280
    Aaron Abed
    Participant

    Are you still looking for a data key?   I have one for sale and a GPS unit if needed.

    Aaron

    November 3, 2015 at 12:18 pm in reply to: 2- 2012 PCR Cadet Chassis's for sale #56235
    Aaron Abed
    Participant

    SOLD

    January 14, 2015 at 8:25 am in reply to: Comer 50cc torque specs #40436
    Aaron Abed
    Participant

    Walt is correct you can get a good idea buy looking into the exhaust port.  If you do pull the head, I torque the Comer C50/51 to 60 inch pounds.   Be sure to use an inch pounds torque wrench.

    Best of luck.

     

    October 10, 2014 at 3:37 pm in reply to: Kart Telemetry #35129
    Aaron Abed
    Participant

    In the WKA Technical Manual it’s in section 211.5.   ……..”Telemetry is not allowed; data can only be downloaded once the kart is off the racing surface and stationary”

    USPKS Rulebook “Any telemetry, other sensors or inputs shall be disconnected while kart is on track. Data downloading can only be done in the pit area.”

     

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)