[Brian Terpstra]

Gary,  I do not have room to move the seat forward, I am 6’2″ and have a hard enough time already fitting.  How would I go about bending the right front down?

[Brian Terpstra]

I have 5lb’s of lead mounted to the left side of the seat.  I was hoping there was an easier way than moving the seat.  What is the best way to move the struts that are welded to the frame?

[Brian Terpstra]

CRG

[Brian Terpstra]

Alright, thanks guys.  I would think that when you purchase something like this it would fit without any trouble.

I do always make sure the halves are the way they should be.  Then flip them, alternate them with even numbered sprockets, stand on my head and do the hokey pokey.😉

[Brian Terpstra]

I am trying to link a video of the thing turning, not that computer savvy.

if I were to install a spacer in the caliper, is that a specific part?  Do I make one with some washers?

[Brian Terpstra]

I double checked to be sure, with the brake rod removed completely there is still a little drag.  How do I back the pads off?

[Author]

Posts