Christopher Madia

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 4, 2014 at 6:26 am in reply to: Rotax DD2 starting problem #31441
    Christopher Madia
    Participant

    I appreciate all the help and responses. I ended up dropping the kart off at my local rotax repair shop. I will let you all know what the verdict is.

     

    July 18, 2014 at 5:40 pm in reply to: Rotax RM-1 won't turn on #30534
    Christopher Madia
    Participant

    The issue is a short in the system.  Have Joey take a look at it tomarrow morning

    July 10, 2014 at 5:12 am in reply to: Rotax DD2 starting problem #30023
    Christopher Madia
    Participant

    I appreciate all the help, I think at this point I am going to try to find someone who will work on it. I live in Upstate NY Syracuse area does anyone know of any place i can bring it to be fixed? the local track i go to is not to familiar with the rotax motor so they were not able to help.

    July 9, 2014 at 1:42 pm in reply to: Rotax DD2 starting problem #30001
    Christopher Madia
    Participant

    I just tried a brand new battery and it did not work. It made the same noise as the old battery did when trying to start. Any other options?

    July 9, 2014 at 11:19 am in reply to: Rotax DD2 starting problem #29993
    Christopher Madia
    Participant

    I just checked the voltage on the battery and it read 12.8 so i know its not the battery. Not sure why when i go to start it the flywheel isn’t engaging if I have sufficient voltage. Could it be a bad starter even though i can hear it winding when i start it?

    July 8, 2014 at 12:15 pm in reply to: Rotax DD2 starting problem #29967
    Christopher Madia
    Participant

    Yea i think the problem i am having is that the flywheel is not engaging. Any idea what the voltage should be on the battery?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)