WTB OTK 180mm rear disc carrier (40mm)

Viewing 2 reply threads
  • Author
    Posts
    • December 2, 2015 at 10:53 am #57564
      Ted Hamilton
      Participant

      <p style=”text-align: left;”>I have one for 50mm, and a rotor too.  $100 for both.  Not sure if you’re thinking of switching to 50mm or not, but you also have an insert made for “double duty” — perhaps 2 of these? http://www.amazon.com/INA-IR40X50X22-Needle-Bearing-Precision/dp/B007D3BNGM</p&gt;

    • December 2, 2015 at 2:25 pm #57571
      Mike Burrill
      Participant

      Ted thanks for the offer. I am going from a 50mm set up to a 40mm set up so I can use a 40mm axle sprag  I recently bought.  If I come up empty on my search I could buy one of those 40>50MM bushings I guess.

    • December 2, 2015 at 7:14 pm #57581
      Ted Hamilton
      Participant

      You’d still have to find a way to key it to the axle, so maybe not a good solution…  Good luck!  ~Ted

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.