WTB: Tomar TD23

This topic has 5 replies, 5 voices, and was last updated 10 years, 5 months ago by Tom Jazwiecki.

Viewing 4 reply threads

Author

Posts
- February 24, 2016 at 6:39 am #61899
  
  Jeff Stone
  Participant
  
  Tom,
  
  I have a used Odenthal Third Bearing Mount, with 30mm clamps. It shows some wear due to a thrown chain, nicks,scratches, etc… But purely cosmetic. Other than that, fully functional.
  
  jlstone_66@yahoo dot com
- February 24, 2016 at 7:00 am #61902
  
  Kirt Burcroff
  Participant
  
  I have a used Mychron 4 with Water temp for $200.
  
  https://www.facebook.com/211124972294203/photos/a.344974655575900.81000.211124972294203/1045485042191521/?type=3&theater
  
  FB message or email me (kburcroff@yahoo.com)
- February 24, 2016 at 7:42 am #61905
  
  Elliot Finlayson
  Participant
  
  Tom,
  Please contact me I have almost all of everything you are looking for and I will give it away at a great deal. I’m almost positive I have a Odenthal third bearing engine motor mount. I have 2 Mychron 4’s, one of which is a 2temp, the other is not. I do not have a complete Tomar clutch, however I do have several friction disks and floater disks for a Tomar clutch that are BRAND NEW. I will make a great package deal for it all!
  
  You can reach me via email at EFinlayson59@comcast.net or you can reach me via my cell at 630-750-9205. Thanks!
- February 28, 2016 at 4:53 am #62131
  
  Tony Granata
  Participant
  
  I have a new Tomar never used…let me know if you’re still looking.
  
  847-343-9127
  
  Tony
- March 23, 2016 at 6:57 am #63240
  
  Tom Jazwiecki
  Participant
  
  10 tooth driver preferred!
Author

Posts