Need help mounting my seat in Maryland (AAFB)

Viewing 2 reply threads
  • Author
    Posts
    • July 24, 2015 at 9:06 pm #51854
      Walt Gifford
      Participant

      What size seat?

      Gif

    • July 26, 2015 at 9:23 am #51935
      Shawn Fountain
      Participant

      Its a large sized seat.

      Are you close to Andrews Air Force Base Walt?

      I could drive to you if you are :)

       

      Shawn 1 301 785 2873

    • July 28, 2015 at 3:57 pm #52055
      Walt Gifford
      Participant

      Get a piece of 3/4 plywood about 1′ x 3′ and put it under your kart where the seat goes. Now for left to right you want the seat to be 1″ left of center so find center and mark it on the plywood. You might have to bend the left strut a bit, try not to kink it. Then put the seat on the wood and get in and slide/tilt around until you find a good spot as far as being forward and back but try to get more forward if it’s comfy. Mark the spot with a sharpy in the left seat strut hole. After you get that right just square up the seat and mark the right strut hole.

      Gif

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.