Kx85 Vacuum fabrication

Viewing 1 reply thread
  • Author
    Posts
    • December 14, 2013 at 8:41 am #17786
      Steen Carstensen
      Participant

      Go to your local hardware store and get a 1/8NPTx1/4″push on brass fitting, then drill and tap matching thread in the intake.

    • December 17, 2013 at 11:05 am #17999
      Matthew Hapip
      Participant

      Perfect, Worked like a charm. Thank you.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.