Bighead floortray fasteners - eKartingNewseKartingNews

Bighead floortray fasteners

This topic has 4 replies, 4 voices, and was last updated 13 years ago by Gregory Stamm.

Viewing 3 reply threads

Author

Posts
- August 26, 2013 at 4:38 pm #8121
  
  Ian Harrison
  Participant
  
  Hi Dillon
  
  Click on the link below for the info you need regarding US Distributors for Big Head Fasteners
  
  http://www.bighead.co.uk/english/contact/distributorlist.asp?country=USA
  
  Click on the link below to browse the product range:
  
  http://www.bighead.co.uk/english/products/standardbigheads.html
  
  Best Regards
  
  Ian
- August 26, 2013 at 8:45 pm #8144
  
  Dillon Johnson
  Participant
  
  Thanks a lot for the quick reply Ian.
- August 27, 2013 at 9:04 am #8181
  
  Jim White
  Participant
  
  Mcmaster carr has something very similar here in the states.
  
  http://www.mcmaster.com/#standard-threaded-rods/=o8xlob
  
  Not metric but the 1/4″ work fine. The head is a bit bigger than the originals but they work fine. I see them on quite a few guys karts (including mine) out here on the west coast.
  
  Good company to deal with. Quick shipping.
- August 28, 2013 at 5:41 am #8258
  
  Gregory Stamm
  Participant
  
  Dillon,
  
  You can buy them direct here – http://www.rotaloc.com/
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.

Archives