[James O’Brien]

Your piston should be smooth and covered in carbon.

[James O’Brien]

.

[James O’Brien]

30 lbs Dave

[James O’Brien]

That had a 205 Derek? Wow, that’s a ton man. Even for a MOD. No wonder you were having problems. Hope you got it narrowed down.

[James O’Brien]

Todd, it sounds like maybe your pipe is not square on the manifold or you have a manifold that has the grooves cut to deep (it happens). I would suggest going back to the stock Honda OEM manifold and sealing ring. This is if your pipe is not worn out. On our 99 and 01 engines we don’t have any splatter problems using the SKUSA S-1 Pipe, if we do usually it’s because the pipe needs to be adjusted.

[James O’Brien]

[James O’Brien]

Clean Kart, $6,800 obo – Let’s make a deal – Give me a call 208-863-7319 or text

 

[James O’Brien]

Reduced to $6,800, Great price now, give me a call

[James O’Brien]

<span style=”color: #444444; font-family: Arial, Helvetica, serif; font-size: 12px; line-height: 21px; background-color: #efefef;”>Reduced!!</span>

<span style=”color: #444444; font-family: Arial, Helvetica, serif; font-size: 12px; line-height: 21px; background-color: #efefef;”>Rolling Chassis: 1450.00 obo</span>

[James O’Brien]

Still available!

[James O’Brien]

More pictures are available, email james@6isfast.com

[James O’Brien]

Ken, thanks for the great read! I’ve been thinking about going to Grass Valley OR for some road racing. Might just do that. Looks like a good experience.

[James O’Brien]

I like the MP adapter wrench. I actually grind off just a little bit of the 12mm side and it works even better for the 99 front clutch side nut.

http://shop.eshifterkart.com/Motion-PRO-Torque-Wrench-Adapter-MP-01.htm

[James O’Brien]

Hey Tadas Rookie chassis are 950, there is an EXP that is 900. But this kart is 950. Still available! Thanks –

[James O’Brien]

Like New Chassis, Price Reduced to 2850.00

[James O’Brien]

No, this kart is being sold with a heavily modified 99 CR 125.

[James O’Brien]

Sold. Thanks EKN.

[James O’Brien]

RPM, If that’s a 99 chances are those plugs do have O-rings that just need to be replaced. Very few cylinders are floating around without o-ring plugs.

Those need to be pressed out, then either buy a new set for 60 bucks or just the O-rings (Swedetech has them listed), if it were me I’d just buy a new plug set.

[James O’Brien]

I’ve always used the master, never broke a 428 chain. Just make sure you are taking good care of your kart and keeping the chain clean and lubed.

[James O’Brien]

Here is both of them:

 

http://www.shop.eshifterkart.com/Clymer-Honda-CR125-1998-2002-M464.htm

http://www.shop.eshifterkart.com/Clymer-Honda-CR125R-CR250R-92-97-M457-2.htm

You need the 92-97 for the tranny break down.

[James O’Brien]

Well, don’t buy anything that says 23mm tubes or holes. Those are not for 125 Shifters. The boxes for the 125 classes will be 29 or 30mm tubes. Personal preference…if you have to run an Air Box,  the KG Ape http://www.shop.eshifterkart.com/KG-APE-30mm-Air-Box-Filtered-Intake-Silencer-FA003AG.htm

The KG is very expensive so a lot of guys also like the straight Freeline and the RLV 4 hole (which you have pictured above). Either way, you loose top end. Unfortunate some tracks, including ours, require the Boxes.

[James O’Brien]

No, this one was sold. Only used shifter I have right now is a 01 Trackmagic with a MOD 99 for 2800

[James O’Brien]

Best 428 chain available? You’ll probably get about 4 answers, but most will tell you DID ER is the best.

http://www.shop.eshifterkart.com/DID-HD-428NZ-X-60-ER-Gold-and-Black-Chain-DID428NZ60G.htm

 

[James O’Brien]

One hand on the wheel = More fun!

[James O’Brien]

Reduced $290.00, on eBay now. Call or text with any questions. 208-863-73 one nine

http://www.ebay.com/itm/201133326287?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

[Author]

Posts