Welcome to the forum.
First, check your grounds. Then pull the carb and disassemble it. Take the needle valve out and clean the carb body thoroughly. Don’t get any cleaner on the needle valve. There is an internal fuel filter. Clean it out. Assemble the carb. Check for a float with fuel in it. Check the float heights. Last, be sure that the vent tube access the top of the carb has an opening in it.

Shane, check you private messages. Thanks.

Use the link below to download the jetting and power valve article by John Savage. John recommends a 3mm float height. That’s a good place to start. I used 4mm but I come from a road race background.
Note: you can download the article but you won’t be able to print it.

http://www.karting1.co.uk/jetting-karting.htm

We’ve had an issue with the engine not revving consistently past 13k – Jr Max with EVO. I finally tried using 2 gaskets on the crank pickup. Amazingly, even on the stand, the engine sound changed, and it is now a lot better. We’ve only had 3 laps at the end of the track day with this change, so need to test it some more, but maybe worth trying.

http://gorotax.com/information-bulletin-dellorto-ignition-system-how-to-assure-faultless-function/