NJMP shifter kart times, clockwise and counter clockwise

Tagged: F1NJ, NJMP, shifter, Tempest, WKC

This topic has 15 replies, 8 voices, and was last updated 13 years ago by Broque Ward.

Viewing 14 reply threads

Author

Posts
- August 7, 2013 at 1:23 pm #6361
  
  Bernard Muminovic
  Participant
  
  These times would get you into the top 3 for qualifying for local/regional drivers
  
  Tempest high 1:02’s – low 1:03’s
  
  Avenger – Low 31’s – High 30’s
  
  Liberator – not sure, don’t remember the times. But I believe similar time to Avenger
- August 7, 2013 at 3:25 pm #6381
  
  Broque Ward
  Participant
  
  I read for sr rotax was around 44.3 on liberator couldn’t find shifter for liberator. drivin me nuts, if you can find out post it up
- August 8, 2013 at 5:20 am #6418
  
  Bernard Muminovic
  Participant
  
  I looked at some times from last year for Liberator…Low 37’s for a shifter is a fast time
  
  44.3 is slow for a Sr. Rotax…should be in the 38’s
- August 8, 2013 at 7:59 am #6455
  
  Chris Rock
  Participant
  
  Tempest – Jonathan Thonon – 59.703 seconds – 7/31/2010.
- August 8, 2013 at 9:44 am #6467
  
  Michael Taksa
  Participant
  
  Chris, do you know if it was with or without the “chicane” before the straight? Wast it even an option in 2010?
- August 8, 2013 at 8:31 pm #6506
  
  Charles Skowron
  Participant
  
  [quote quote=6467]Chris, do you know if it was with or without the “chicane” before the straight? Wast it even an option in 2010?[/quote]
  
  F1 New Jersey basically created the straight-line bypass around the chicane, as well as opening up the esses section, for the international WKC guys 3 years ago. So I would imagine Thonon’s time was set without the chicane.
- August 11, 2013 at 10:19 am #6695
  
  Broque Ward
  Participant
  
  I drove it with the chicane trying to see where I stand for time so I know what to aim for
- August 11, 2013 at 3:34 pm #6710
  
  Anonymous
  Inactive
  
  ^what were your times?
- August 11, 2013 at 7:26 pm #6721
  
  Bernard Muminovic
  Participant
  
  When Jonathan set that time in 2010, that was without the chicane
- August 11, 2013 at 7:33 pm #6723
  
  Broque Ward
  Participant
  
  42’s and a couple. 41’s first time on that track
- August 11, 2013 at 8:21 pm #6727
  
  MikeGoebel
  Participant
  
  Don’t shoot for Thonon’s times as that is very unrealistic for an armature.
  
  Mike G.
- August 11, 2013 at 8:46 pm #6728
  
  Broque Ward
  Participant
  
  [quote quote=6723]42′s and a couple. 41′s first time on that track[/quote]
  
  that’s on the liberator with chicane
- August 11, 2013 at 8:51 pm #6730
  
  Broque Ward
  Participant
  
  I’ll be back at njmp Saturday I only ran in my shifter for about 5 laps first time till the c clip popped off the needle… I fixed it temporarily and after another 5 laps my temp fixes failed so I got more time in my girls kt100 about 25-30 laps and times kept going Down can’t wait to get in my shifter all fresh and lay down some faster lap times
  
  n
  
  nn
  
  cant wait to get ihn.
  
  nn..
- August 12, 2013 at 8:23 am #6757
  
  Christiaan Bouhuys
  Participant
  
  Stock moto at 405lbs:
  
  Liberator with chicane CCW: ran low 37s last Saturday while doing engine testing and not focusing on chassis set-up. High 36s are possible with dialed-in chassis.
  
  Tempest CCW with chicane mid to high 1.06’s. Tempest is not run CW as far as I know.
  
  Avenger CCW high 31s.
- August 12, 2013 at 8:31 am #6759
  
  Broque Ward
  Participant
  
  know this is theshifter forum but anyone know times for kt100’s for liberator with chicane?
Author

Posts