I think a lot of us use Tri-Flo for this purpose. Does the trick nicely! Use as needed to keep parts moving freely. It depends on what you clean your moving parts with, but we re- apply whenever things get sticky.

http://www.triflowlubricants.com/

I use Tri-Flow for axle bearings, spindle bearings, steering shaft bearing etc. and never have had an issue. Clean bearings thoroughly between sessions by spraying with brake cleaner or starting fluid, then apply Tri-Flow before you go out each time.

I always recommend starting fluid first because it doesn’t eat the powdercoat like brake cleaner does. Some people seem to have better access to brake cleaner, that’s the only reason I mention it. But starting fluid is the best, we buy it in cases.

My dad, Tim, is the stand guy. I’m the helmet painter guy. :)

Oooh.. starting fluid.  Good tip!

Molecule makes some good stuff to clean your Kart with: http://www.accelerationkarting.com/molecule.aspx

Motul also makes some cleaners and lubes: http://www.accelerationkarting.com/motul.aspx

I am not sure starting fluid or carb cleaner are good ideas for your health?

Curtis,

Can’t be any worse than breathing 2-stroke exhaust fumes for a few pace laps.