Gas Gas Clutch banjo bolt - eKartingNewseKartingNews

Gas Gas Clutch banjo bolt

This topic has 3 replies, 3 voices, and was last updated 11 years, 7 months ago by Chris Reinhardt.

Viewing 2 reply threads

Author

Posts
- January 22, 2015 at 9:08 am #40886
  
  Chris Reinhardt
  Participant
  
  Generally speaking there’s two flavors of metric banjo bolts on these karts, fine and course…
  
  Most likely it’s a 10mm by 1mm, which is fine.
  
  Most European motorcycles (Ducati) use the fine, most Japanese bikes use the course…
  
  CR
- January 22, 2015 at 4:11 pm #40908
  
  Ian Harrison
  Participant
  
  Hi Dillon
  BT280522106 (WAS part number M01060000) Bleeder “banjo” bolt. OEM GASGAS with Hydraulic Clutch 1992~2007 all models including Enduro, and Pro. Standard European 10 X 1.0 mm thread size. Fits most brands of Trial motorcycles on clutch and some brake applications.
  
  http://i186.photobucket.com/albums/x26/Viperracinguk/GasGasClutch_zpsd8db8bf8.jpg
  Available from here. Scroll down the page and it’s just over half way down:
  http://www.ajpamerica.com/rebuild-kits-and-parts.html
  
  Best Regards
  
  Ian :-)
- January 22, 2015 at 4:50 pm #40910
  
  Chris Reinhardt
  Participant
  
  Good job Chris….. Thanks for the pat on the back Ian…. :)
  
  Looks very much like a CRG front caliper bolt….
  
  #5 FM0-00308 $8.25
  
  http://cometkartsales.com/5.-FM0.00308-Bleeder-Fitting-Complete.html
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.

Archives