The kart is a Hornet Allegra enduro kart. Made in 1968 or 1968. Made in Waco Texas.

PM sent

Michael — where are you located? I have a copy of a Rupp A-Bone that would be a great starter kart… I’d make you a killer deal — cheaper than the parts you’ll need to resurrect that. Plus there’s enough “tidying” up to do on mine that you could still treat it like a project although it’s a “runner” now.

Let me know if you’re interested.

I would sell that to someone interested in restoring vintage karts and buy a modern used kart that’s already running or very close to it. It’s way too big for a kid anyway.

Gif

Neat project but definitely not something for a 5 year old. Have fun restoring it and teaching some basics mechanics through that but find a Kid Kart to learn driving with. Sized more appropriately with a safer seat, pull start, low horsepower and front end geometry that makes it easy for the younger kids to operate.

Those tanks scream enduro, or laydown kart. +1 swap for something else.  Plus don’t forget, your dealing with 45 year old metal.

I would just restore it to have around and maybe run it in the vintage class youself, as for your kid I would buy a kid kart and have fun with it at the track.

I have been involved with karts for many years.  Your Hornet Enduro kart would be very expensive to restore ($1,000+).  And, there are few places to run or race it.  It has a few salable parts (Spindles, tank, etc.)

Look at a local track for a Kid Kart with a Comer engine.  Older used ones are cheap and would fit a tall 5 yr. old, be cheap to run, and you would have many places (Tracks) to run it.

Or, the vintage kart above would be a lot of fun, but not as many as many opportunities to drive it.

In 1970 I drove a C-Open (270cc alky) Hornet Allegro Shark.  If I still had it I would have no interest in restoring or racing it again.

[URL=http://s377.photobucket.com/user/Jack_Gesler/media/AllegroShark.jpg.html][IMG]http://i377.photobucket.com/albums/oo219/Jack_Gesler/AllegroShark.jpg[/IMG][/URL]

Michael,

Parking lots and fields are no place to introduce a child to karting. Even seemingly well organized events can be dangerous when an inexperienced driver is involved. This link leads to a tragic story that serves as a reminder of how quickly things can go wrong.

https://www.facebook.com/photo.php?fbid=10152257776506545&set=a.76320161544.83777.55326701544&type=1&fref=nf

I’m all for introducing kids to karting but it should be done with properly designed and prepared equipment that is suitable for the age and experience of the driver and the driving should be confined to properly designed and maintained dedicated racing facilities.

The chassis you have there is designed to fit an adult laying down and will sit about 1″ off the ground if fitted with typical kart tires and wheels. The kart is intended to be used on large road racing circuits and will not turn sharp due to the long wheel base. It would be worse than starting from scratch to convert it to a machine that suits a 6 year old driver.

Hope you take the good advice offered here by several well intentioned posters and re think your plans.

Regards,

Steve O’Hara

Michael,

Part it out on ebay, some of the pieces will generate some interst.

That Margay throttle pedal will attract plenty of attention and more so if you can find the mate to it. The tanks might get some attention and the same for the spindles.

The rear axle, sprocket hub, swing mount, brakes will also sell.

You can also post information about the kart on the vintage karting sites… here are some links…

http://www.vintagekarts.com/forum/

Home

http://www.lostenduros.com/

Good luck!

Steve O’Hara