Cleaning out the trailer! PM me for more details & photos. All CRG chassis parts are from an older Blue Demon. Leopard parts are all Pre-MY09. All reasonable offers will be taken.

– Leopard crank/rod – Clutch side damaged

– CR80 crank/rod (rod will likely need replaced but crank is good)

– CR80/85 o-ring exhaust manifold

– CRG front nerf bar

– 40 mm Righetti Ridolfi axles (B compound – Medium)

– IAME exhaust tip

– Leopard exhaust header w/ EGT port

– Leopard blue ignition coil

– Exhaust flex wrap (8″ long)

– Leopard 10 tooth clutch sprocket (aftermarket)

– Leopard starter adapter drive

– Leopard ignition rotor

– Pre-MY09 Leopard cylinder head

– Complete Leopard push-button wiring harness and ignition stator

– CRG 2000-up brake caliper mounting bracket

– Birel “Banana” rear brake pads (2008+) – Sinter Red Carbon 222

– CRG 100 cc spindles (left & right) – 17 mm w/ 8mm kingpin bolts & new bearings included

– CRG 4-position camber/caster pills (8 mm kingpin)

– CRG front wheel hubs – 17 mm x 80 mm (CRG wheel pattern)

– 40 mm axle shifter sprockets (428 chain): 22 & 23 steel / 27, 28, 29 aluminum

– Righetti Ridolfi rear bumper mounts (plastic bumpers) – 30 mm chassis

– 40 mm axle hubs: 100 mm (2 ea.),

– 50 mm x 85 mm Freeline axle hubs (2 ea.)

– Douglas aluminum front wheels (CRG pattern- 5″ width/2.25″ backspace): 4 ea. black / 2 ea. polished

– Douglas aluminum rear wheels (7.75″ width/2.5″ backspace): 2 ea.

– 40 mm axle sprocket carrier

– 50 mm axle sprocket carrier

– Leopard starter (needs brushes)

– Odenthal 10 deg. Tag engine mount (& vibration plate)

– 219 chain breaker tool

– Leopard reed cage (complete) – reeds will need replaced

– 40 mm axle plastic water pump pulley

– Leopard clutch cover w/ coil mount

– Slant-style sidepods (complete)

– Black  Freeline-style nose w/ CRG decals

– Red Freeline-style nose (blank)