CRG help

Viewing 19 reply threads
  • Author
    Posts
    • October 22, 2013 at 6:53 pm #13452
      Joe Johnson
      Participant

      The holes are a lot of adjustment.  You will notice big changes from axle up or down.

       

    • October 22, 2013 at 6:58 pm #13453
      Ace Rossi
      Participant

      Joe I know that moving axle up or down makes a change but my question is, is ALL the adjustment JUST in that 1/4 inch either way? Seems it would be more. The guide says try different holes but looking at mine, by using different holes, the cassettes won’t fit the hither holes, so I’m stuck using just the holes I’ve been!

    • October 22, 2013 at 7:02 pm #13455
      Ace Rossi
      Participant

      Here is a picture showing the mounting holes with very little adjustment! Is this all there is in adjusting up or down?

      [IMG]http://i1203.photobucket.com/albums/bb394/Goldbus/null_zps5a0b42b6.jpg[/IMG]

    • October 22, 2013 at 7:03 pm #13456
      Ace Rossi
      Participant

      Maybe this will work

      http://i1203.photobucket.com/albums/bb394/Goldbus/null_zps5a0b42b6.jpg

    • October 23, 2013 at 3:50 am #13476
      Chris Reinhardt
      Participant

      Ace, there’s two adjustments for rear ride height, up or down, choose one and try it….

      CR

    • October 23, 2013 at 5:09 am #13479
      Ace Rossi
      Participant

      It’s obvious you guys are missing THE question!

      As seen in the picture, I HAVE moved the axle up  AND  down .

      I know what it’s supposed to do both ways!

      What I’m asking is, is the total adjustment ONLY  a 1/4 inch (if that) up and down?  OR is there a set of another group of holes that I’m not seeing?

      Its a fairly simple question! It’s yes or no and the holes I’m using is ALL the adjustment there is, period!

    • October 23, 2013 at 5:51 am #13481
      Chris Reinhardt
      Participant

      I guess you missed the point!!!  That’s IS the adjustment, slotted holes, all up, or all down…..  Are there another set of holes on your brackets?  Then I guess that’s it then….

      CR

    • October 23, 2013 at 6:24 am #13486
      Chris Bany
      Participant

      Ace – YES, that is the adjustment, very small measurment up or down and it will make a big difference to set up and on track feel.

    • October 23, 2013 at 6:33 am #13492
      Ace Rossi
      Participant

      Thank you Chris Finally! That’s all I was looking for. A confirmation that Inwasnt overlooking something! I guess I should have asked you in the first place!

      BTW, how those ribs?

    • October 23, 2013 at 8:57 am #13520
      Daryle Redlin
      Participant

      Sometimes there is a small 6mm hole in the carrier that will line up with a small hole in the actual cassette. This will give you a middle position, however most times you will either race with it up or down.

    • October 23, 2013 at 2:47 pm #13561
      Brian Degulis
      Participant

      I’m surprised non of you seasoned guys know about the hidden ride height adjustment on the 08 CRG shifter chassis.

      Brian

    • October 23, 2013 at 3:18 pm #13563
      Chris Reinhardt
      Participant

      Weren’t the 08’s 4 bolt cassettes?  That picture looks to be a 3 bolt?

      CR

    • October 23, 2013 at 10:52 pm #13591
      Jimmy McNeil
      Participant

      Yes the 08’s are four bolt

      Ace, does that chassis have ven05 brakes?

    • October 24, 2013 at 3:13 am #13593
      Ace Rossi
      Participant

      Jimmy I was told it has ven4 brakes!

    • October 24, 2013 at 5:14 am #13595
      Chris Reinhardt
      Participant

      Sounds like you have an 07 at best…..

      CR

    • October 24, 2013 at 5:17 am #13597
      Ace Rossi
      Participant

      Nope it’s an 08

    • October 24, 2013 at 6:46 am #13622
      Chris Reinhardt
      Participant

      I think you missed the point…..again….  The 08’s had 4 bolt cassettes and VEN 05 brakes, yours does not….

      CR

    • October 24, 2013 at 6:56 am #13626
      Ace Rossi
      Participant

      No point missed but… Whatever!

       

    • October 24, 2013 at 9:28 am #13667
      Ace Rossi
      Participant

      It’s all good Jimmie! It is what it is

    • October 24, 2013 at 9:29 am #13668
      Jimmy McNeil
      Participant

      I hear ya.

      Man it’s tuff posting with my phone.

       

    • October 24, 2013 at 9:22 am #13665
      Jimmy McNeil
      Participant

      Ace, if it says 08 on the chassis Id plate, it could still be a 06 or 07.

      Its the homologation period wich I think is three years.

      Forinstance, i think my 2012 chassis says 2014 On the chassis Id plate.

      ive probably owned 9 or 10 2008 road rebels, all have had four bolt cassette and ven05 brakes

  • Author
    Posts
Viewing 19 reply threads
  • You must be logged in to reply to this topic.