| View previous topic :: View next topic |
| Author |
Message |
Rob Hogenmiller
Joined: 20 Jul 2001
Posts: 855
|
 Posted: Fri Aug 17, 2001 2:41 pm Post subject: PI Box vs. Stock CDI and Jetting Characteristics |
 |
|
I was wondering if someone could tell me.... If going from a CDI Stock Box to the PI Box will effect my jetting settings.
For example if I have it spot on and the only thing I change is the PI box, will my jetting need to change too.
Would it be a mild jetting change or could I be searching quite a while for spot on?
Thanks,
Rob Hogenmiller
www.nationalkarting.com |
|
| Back to top |
|
 |
John Neilson
Joined: 19 Jul 2001
Posts: 495
Location: United States, California, Sun Valley
|
| Posted: Fri Aug 17, 2001 6:39 pm Post subject: PI Box vs. Stock CDI and Jetting Characteristics |
|
|
Rob,
This is a very good subject. To be safe, jet the main up 2 sizes and test. The PI box is not magic, it requires tuning just like the rest of the motor. Not to scare you away, but, I tune the curves in the PI to the track and air available. Be careful, you can excede the design limitations of the CR80 with disasterous results. Best to start fat and test the available curves. Then lean down. You didn't mention which PI you will be running.
John |
|
| Back to top |
|
|
Rob Hogenmiller
Joined: 20 Jul 2001
Posts: 855
|
| Posted: Fri Aug 17, 2001 9:33 pm Post subject: PI Box vs. Stock CDI and Jetting Characteristics |
|
|
John,
I believe last time I spoke with my sponsor they were running the Vortex, so that's what I'll run unless they have made a switch.
Rob Hogenmiller |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
