3rd Bearing Support

Ron Gordon · Joined: 27 Dec 2009 Posts: 150

Does anyone still make or know where to get one of the 3rd Bearing supports for a KT100 that bolts directly to the engine case around the clutch, instead of on a plate under the engine?

Thanks, Ron
_________________
Just another one of the Many OVKA Karter's
and OVKA Kid Kart Director

Jim Howe · Posted: Tue Feb 05, 2013 7:35 am Post subject: MKP Sold Those

Check with Motorama Kart Parts (MKP), now known as TopKart USA, as they were still handling them last year. They're in Indianapolis/Brownsburg, IN.

andy metzger · Posted: Tue Feb 05, 2013 4:06 pm Post subject: 3rd bearing

Ron

I have 2 new anodized billet suports made by JM racing. Would you like pictures?

Andy

Ron Dodson · Joined: 27 Aug 2009 Posts: 53

Must be the name, I'm interested in the same support.

Andy, I'd be interested in pictures.

andy metzger · Posted: Tue Feb 05, 2013 6:42 pm Post subject:

Ron D

Ron G asked first, but I have two of them. Give me your email address and I will send you pictures tomorrow as well.

Andy

andy metzger · Posted: Wed Feb 06, 2013 10:13 am Post subject: support

Guys

Pictures sent.

Thanks

Andy

Eric Stockford · Posted: Thu Feb 07, 2013 6:55 am Post subject:

http://www.ebay.com/itm/251223983461?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_57wt_1170

Heres a deal.........

patrick slattery · Posted: Thu Feb 07, 2013 8:20 am Post subject:

patrick slattery · Posted: Fri Feb 08, 2013 8:50 am Post subject:

Ron, I have not seen that type of third bearing support for a long time, and I believe that you have to have an old style case for it to work, as there are no bolt holes on the newer style Yamaha's.

If your looking for a all in one mount and 3rd bearing support for the Cadet, I think the Odenthall mount might be the ticket. When trying to get a yamaha to mount on the Cadet you have to take in consideration that the side pod mount can get in the way of some mounts, without having to raise the engine up higher by using some spacer plates. It is a pain in the but to get some of these karts to accept a Yamaha, on the older Arrows.

Pat