PKT or Noonan Pedel Risers

Britain Smith · Joined: 21 Jul 2010 Posts: 8

I am in the market for a set of pedal risers for my son's Jr/Cadet chassis. What are you thoughts on the Noonan vs the PKT set-ups? Thanks in advance.

-Britain

Noonan:

PKT:

William French · Posted: Wed Nov 28, 2012 10:56 am Post subject: PKT & Noonan

Both are great. I personally prefer the PKT because they are easier to mount and allow a little more flexability. Both both are widly used and proven products.

Britain Smith · Joined: 21 Jul 2010 Posts: 8

Cool, thanks for the input.

Another question...where does one get a shorter brake pull rod?

-Britain

Greg Welch · Posted: Wed Nov 28, 2012 11:17 am Post subject:

A lot of people cut them, and thread a die down it so they can reattach the clevis. When your kid outgrows it you can get a new stock rod.
_________________
Greg Welch
Unser Racing Performance Division

Britain Smith · Joined: 21 Jul 2010 Posts: 8

Got it...that is what I had planned to do.

-Britain

Jim Campeau · Joined: 21 Nov 2010 Posts: 36

Comet kart sales sells shorter ones

Lawrence Doty · Posted: Wed Nov 28, 2012 7:08 pm Post subject:

We have the PKT's.
Don't sell them once he/she grows out of them with the cadet...you just might need them when they start racing full size chasis.
It took us a long time to get them setup correctly...but that may have just been us...he wanted a certain feel and I wanted he feet in the correct position...
The carbon plate his foot rests on broke the second day we used them.
And because of the angle the bases are cut at, once his legs get a little longer (but before they are long enough for the stock peddles) it looks like I will have to swap the base so I can move the peddles out a little further.
Even with all that, I would buy these again...the up side over rides the down.

Britain Smith · Joined: 21 Jul 2010 Posts: 8