1.25" hub for #428 chain, LTO chassis?

Ted Hamilton

I have a kart I'll be putting a 428 conversion on (2006 RM125 engine, winged outlaw kart).

I've sourced the engine sprockets from PBI (14t,15t) but need help with the rear. I'm looking for #428 rear sprockets that fit a standard MCP brake hub or similar? Hoping Jerry or George or someone can point me in the right direction... Appreciate it.... Thanks!

~Ted
_________________
Owner, www.hamiltonhelmets.com // UAS Racer #76 // Karting for karting's sake...keep it fun!

tim sawyers · Joined: 11 Dec 2012 Posts: 1

Seen a kart where they made a sleeve go from 1.25 to 40 mm.then he put a 2 Pc sproket over it.I myself have two 1.25 hubs on karts. The sprokets came from sproket speciaties.There no name on the hub.I myself would to know who built the hubs.

Tom ONeil · Joined: 20 Jan 2009 Posts: 72

I would stick with the 520 based on my experience in Wing Outlaws.
_________________
Starman Racing
2011 National Champion - Outlaw 125 - T.Dowd
2010 Longhorn Outlaw 125 Champion - T.Dowd
2011 Lonestar Nationals 125 Champion - T.Dowd
2011 National Champion - Outlaw 250 - K. Engstrom

Ted Hamilton · Posted: Sun Dec 23, 2012 1:28 pm Post subject:

THanks for the input, Tom. I ended up selling the RM and getting a CR500 anyhow...sticking with #520...

~Ted
_________________
Owner, www.hamiltonhelmets.com // UAS Racer #76 // Karting for karting's sake...keep it fun!