| View previous topic :: View next topic |
| Author |
Message |
Brian Butt
Joined: 24 Aug 2012 Posts: 4 Location: United States, Ohio,
|
Posted: Fri Aug 31, 2012 6:29 am Post subject: How to charge battery |
|
|
| My tag battery is dead from sitting for a few months. Someone told me I can just charge it with a car battery trickel charger. Is it ok to use this type of charger? Thanks! |
|
| Back to top |
|
 |
Carl Beavers
Joined: 14 Sep 2010 Posts: 21 Location: United States, Idaho, Boise
|
Posted: Fri Aug 31, 2012 10:29 am Post subject: |
|
|
Yes, you should be OK using any 12 volt charger so long as you do not exceed the capacity of the battery. Exceeding the capacity of the battery will boil the battery dry and kill it in short order.
Do not be surprised if the battery is beyond saving and will need replaced. Batteries left in an uncharged state die an early death.
Good Luck. |
|
| Back to top |
|
 |
Volker Krahn
Joined: 08 Apr 2012 Posts: 53 Location: Germany, not USA state, Hanover
|
Posted: Fri Aug 31, 2012 10:29 am Post subject: |
|
|
| Yes, it is ok. It matters that the charging current isn't too high. Anyway we use a special charger for gel batterys. |
|
| Back to top |
|
 |
Nathan Adair
Joined: 19 Dec 2011 Posts: 62 Location: United States, Florida, Orlando
|
Posted: Sun Sep 02, 2012 2:51 pm Post subject: |
|
|
| I use a Battery Tender Jr. that is made for motorcycle batteries. I picked it up at the local auto parts store for $20-30 and they're safe for AGM batteries. |
|
| Back to top |
|
 |
Chris Hurst
Joined: 27 Jul 2007 Posts: 570 Location: United States, California,
|
Posted: Sun Sep 02, 2012 6:09 pm Post subject: |
|
|
I finally made the choice to invest in a real battery charger at Sears after using the 20-30 dollar trickle chargers and having loads of reliability issues with the actual charging units themselves. I think I paid $90 or $100 and it has been well worth it. Several modes of charging and charges much faster than the trickle units. Also shows battery voltage as it rises etc.
I would save some money and invest in good equipment. Batteries are an essential part of any automotive system. You get what you pay for an personally I have had no luck with cheap equipment in the past. |
|
| Back to top |
|
 |
Justin Martin
Joined: 27 Mar 2012 Posts: 328
|
Posted: Wed Sep 05, 2012 7:44 am Post subject: |
|
|
| Hey guys, along the same question. I just got into Sr Rotax and don't have the rotax charger. I have loads of fancy chargers for RC stuff. Now even if the charger is for a different chemistry I assume I can still charge the lead acid as long as I charge to the proper amperage and voltage right? |
|
| Back to top |
|
 |
Eric Stevens
Joined: 09 May 2002 Posts: 128 Location: United States, California, Pasadena
|
Posted: Sun Sep 09, 2012 7:37 am Post subject: |
|
|
| Justin Martin wrote: | | Hey guys, along the same question. I just got into Sr Rotax and don't have the rotax charger. I have loads of fancy chargers for RC stuff. Now even if the charger is for a different chemistry I assume I can still charge the lead acid as long as I charge to the proper amperage and voltage right? |
Most RC battery chargers have a option for lead acid batteries labeled Pb. Choose that option with the correct number of cells and recommended charge current, you will properly charge the battery with this style of charger and most can connect to your tow vehicles battery as the power source.
Eric |
|
| Back to top |
|
 |
|