front spindle bearing

Ryan Leger · Joined: 19 Jul 2012 Posts: 133

Hey guya need aome help was wondering if anyone neq what aize bearing i would need for my front spindle its a crg ven99 front brake setup amd i want to comvert it to 10mm king pin but the spindlw is a 17mm amd the 10mm bearings out of my 25mm spindles wont fit from thw looks of it so was wondering id anyone new the bwaring size i would need

Joe Ricard · Posted: Sun Aug 19, 2012 10:13 am Post subject:

17mm x 30mm
_________________
Arrow AX-8/ Rotax Sr.

Ryan Leger · Joined: 19 Jul 2012 Posts: 133

im talking about the bearing in the actual spindle they dont measure 17x30 mine were od 22mm id 8mm and height was 7mm could ai run a bearing with a 22x10x6 dimensions

Joe Ricard · Posted: Mon Aug 20, 2012 5:01 am Post subject:

So you want a King Pin Bearing 8mm ID x 22mm OD All the kart shops carry them. it's also the same as a roller blade or skate board wheel bearing.
_________________
Arrow AX-8/ Rotax Sr.

Ryan Leger · Joined: 19 Jul 2012 Posts: 133

Thats whats in it now im changing to a 10 mm king pin so im guessing i would need a bearing with same od and with a in of 10mm