| View previous topic :: View next topic |
| Author |
Message |
Kerry Neilson
Joined: 20 Jun 2002
Posts: 1
Location: BC Canada
|
 Posted: Thu Jun 20, 2002 12:50 pm Post subject: Problems with Honda RPM's |
 |
|
| Most of the responses are accurate and possible.If the govenor and cam have been stripped,tach is hooked up proper( at idle speed should read 12-1400)stiffer valve springs( g200 or old gx140 part#)Intake centre at around 111 (plus or minus 1 deg), the engine should hit 68-7000 on a good day air wise. The e-tubes that are coming in the 200`s have been inconsistent, you want a 5x5 stock tube with a.076 centre hole. The tubes that were faves with the 160`s(3x3)run too rich. |
|
| Back to top |
|
 |
Brad Onuch
Joined: 20 May 2002
Posts: 29
Location: Canada,
|
| Posted: Fri Jun 21, 2002 1:25 am Post subject: Problems with Honda RPM's |
|
|
| kerry, what is the correct part number of the e tube? |
|
| Back to top |
|
|
Hance Lord
Joined: 30 Oct 2001
Posts: 44
Location: Afghanistan,
|
| Posted: Tue Jun 25, 2002 5:51 am Post subject: Problems with Honda RPM's |
|
|
Kerry:
Any hints about where that e-tube comes from?  I'm looking for one but have no part number, and local is not a big fan of guessing them!  |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
