| View previous topic :: View next topic |
| Author |
Message |
Ambrose Buldo
Joined: 06 Jul 2009
Posts: 265
Location: United States, New Jersey, Old Tappan
|
 Posted: Sun Sep 16, 2012 9:22 pm Post subject: AIM MYCRON 4 Issue |
 |
|
I have an AIM Mychron 4 on my KPV 100 CC powered Kart. It is connected to an AIM GPS-505 that has worked flawlessly for over a season.
A couple weeks ago the GPS stopped working and imulationously I cannot downlaod data from using the DataKey.
The GPS plugs into a 2 port data hub. The hub is powered by a RC battery. The battery is fully charged. The free port on the datahub is where I plug in the datakey when I need to do a download. Normally I plug in datakey into the free port on the hub, turn the AIM on and download starts. Almost looks like power is not getting to the hub (since both the GPS and datakey get power from the hub), but I checked all wiring and it is intact.
The egt and the IR laptime reciever both work, but these are plugged into the back of AIM unit itself. Not that I think the system needs it, but the 9 V battery inside the AIM display unit is fresh.
Any suggestions?
_________________
Ambrose Buldo - AKA Racer27
Old Tappan, NJ 07675
Current: Citation FC2000 (For Sale), Madza RX8, VW Eos
Kart for myself: Intrepid Silverstone Pro w/HPV3 --- With a ROK TAG engine waiting in wings
Kart for Daughter: 2001 Birel ARC-100 |
|
| Back to top |
|
 |
John Matthews
Joined: 04 Dec 2004
Posts: 2013
Location: United States, Michigan, Williamsburg
|
|
| Back to top |
|
|
Mike McKnight
Joined: 12 Aug 2001
Posts: 203
Location: United States, Virginia, Roanoke
|
| Posted: Mon Sep 17, 2012 9:30 am Post subject: |
|
|
| Ambrose disconnect the data hub and see if your key will download when its plugged into the MyChron4. |
|
| Back to top |
|
|
Ambrose Buldo
Joined: 06 Jul 2009
Posts: 265
Location: United States, New Jersey, Old Tappan
|
| Posted: Mon Sep 17, 2012 9:55 am Post subject: |
|
|
| Mike McKnight wrote: | | Ambrose disconnect the data hub and see if your key will download when its plugged into the MyChron4. |
Thanks for the input. I believe I did this and no change in results. I think the 3rd port (Lowest) on on the back of the AIM was for Data Key and Data Hub Connection. I will try it again just incase I selected the wrong port on the back of the AIM. . If it was just the DataKey not working, I'd buy a new one and be done with it. But fact that the data hub (Which the GPS is connrected to) is dead also leads me to believe it is not just the key.
_________________
Ambrose Buldo - AKA Racer27
Old Tappan, NJ 07675
Current: Citation FC2000 (For Sale), Madza RX8, VW Eos
Kart for myself: Intrepid Silverstone Pro w/HPV3 --- With a ROK TAG engine waiting in wings
Kart for Daughter: 2001 Birel ARC-100 |
|
| Back to top |
|
|
Mike McKnight
Joined: 12 Aug 2001
Posts: 203
Location: United States, Virginia, Roanoke
|
| Posted: Mon Sep 17, 2012 10:00 am Post subject: |
|
|
We would be happy to have a look at your system if you want to send it down to our Virginia office. Normally we can turn repairs around in a day to two. If you would like to do that send it to,
AiM Sports SE
1636 B 9th Street SE
Roanoke, VA 24013-2700
Mike |
|
| Back to top |
|
|
Ambrose Buldo
Joined: 06 Jul 2009
Posts: 265
Location: United States, New Jersey, Old Tappan
|
| Posted: Mon Oct 01, 2012 11:23 am Post subject: |
|
|
| Mike McKnight wrote: | We would be happy to have a look at your system if you want to send it down to our Virginia office. Normally we can turn repairs around in a day to two. If you would like to do that send it to,
AiM Sports SE
1636 B 9th Street SE
Roanoke, VA 24013-2700
Mike |
Shipped out to you today...
_________________
Ambrose Buldo - AKA Racer27
Old Tappan, NJ 07675
Current: Citation FC2000 (For Sale), Madza RX8, VW Eos
Kart for myself: Intrepid Silverstone Pro w/HPV3 --- With a ROK TAG engine waiting in wings
Kart for Daughter: 2001 Birel ARC-100 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
